Fendt 1Z or MAN 2L3?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 1Z has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2L3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fendt 1Z suits loader and hydraulic implement work better on this data: 137% (685 kg / 1,510 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1Z | 2L3 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 18.3 kW (24.5 hp)Traktorenlexikon, “Fendt Farmer 1 Z” | 18.3 kW (24.5 hp)Traktorenlexikon, “MAN 2L3” | Not comparableNot comparable on power at the PTO shaft: the 1Z has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2L3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1Z and the 2L3. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1Z and the 2L3. |
| Which pumps more oil for implements? | 15.0 L/min (4.0 gpm)Traktorenlexikon, “Fendt Farmer 1 Z” | — | No figureNo call on hydraulic flow: no figure on record for the 2L3. |
| Which lifts more on the three-point hitch? | 1,185 kg (2,612 lb)Traktorenlexikon, “Fendt Farmer 1 Z” | 500 kg (1,102 lb)Traktorenlexikon, “MAN 2L3” | AheadThe Fendt 1Z has 137% more lift (685 kg / 1,510 lb) than the MAN 2L3 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 1,595 kg (3,516 lb)Traktorenlexikon, “Fendt Farmer 1 Z” | 1,370 kg (3,020 lb)Traktorenlexikon, “MAN 2L3” | Ahead (a fact, not an advantage)The Fendt 1Z is 16% heavier (225 kg / 496 lb) than the MAN 2L3 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 2,040 kg (4,497 lb)Traktorenlexikon, “Fendt Farmer 1 Z” | — | No figureNo call on maximum permissible mass: no figure on record for the 2L3. |
| Which has the wider choice of gears? | 6Traktorenlexikon, “Fendt Farmer 1 Z” | 6Traktorenlexikon, “MAN 2L3” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | YesTraktorenlexikon, “Fendt Farmer 1 Z” | YesTraktorenlexikon, “MAN 2L3” | EvenEven on a creeper range: every machine offers one. |
| Which is faster on the road? | 20 km/h (12.4 mph)Traktorenlexikon, “Fendt Farmer 1 Z” | 20 km/h (12.4 mph)Traktorenlexikon, “MAN 2L3” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 585 rpmTraktorenlexikon, “Fendt Farmer 1 Z” | 540 rpmTraktorenlexikon, “MAN 2L3” | No figureNo call on PTO speeds: no standard PTO speed stated for the 1Z. |
| Which PTO runs independently of the ground drive? | dependent (stops with the clutch)Traktorenlexikon, “Fendt Farmer 1 Z” | — | No figureNo call on PTO independence: not stated for the 2L3. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Fendt Farmer 1 Z” | 2WDTraktorenlexikon, “MAN 2L3” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1963–1967 | 1958–1962 | Ahead (a fact, not an advantage)The Fendt 1Z is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fendt 1Z has 137% more lift (685 kg / 1,510 lb) than the MAN 2L3 (both lift at the hitch ends, as stated by the source).
- The Fendt 1Z is 16% heavier (225 kg / 496 lb) than the MAN 2L3 (both unladen weight, as stated by the source).
- The Fendt 1Z is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on a creeper range: every machine offers one.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: all two-wheel drive.
- Not comparable on power at the PTO shaft: the 1Z has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2L3 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, PTO speeds and PTO independence.
← Every figure for both machines, side by side, with sources