Fendt 1Z or Ford 1600 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1Z has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 1Z suits loader and hydraulic implement work better on this data: 53% (413 kg / 911 lb) more three-point lift.
  • The Fendt 1Z suits road haulage better on this data: 17% (295 kg / 650 lb) more maximum permissible mass and 33% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 1Z and Ford 1600 (A), with the call on each
Question1Z1600 (A)Call
Which puts more power through the PTO shaft?18.3 kW (24.5 hp)Traktorenlexikon, “Fendt Farmer 1 Z”18.4 kW (24.7 hp)Traktorenlexikon, “Ford 1600”Not comparableNot comparable on power at the PTO shaft: the 1Z has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 1Z and the 1600 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 1Z and the 1600 (A).
Which pumps more oil for implements?15.0 L/min (4.0 gpm)Traktorenlexikon, “Fendt Farmer 1 Z”15.9 L/min (4.2 gpm)Traktorenlexikon, “Ford 1600”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?1,185 kg (2,612 lb)Traktorenlexikon, “Fendt Farmer 1 Z”772 kg (1,702 lb)Traktorenlexikon, “Ford 1600”AheadThe Fendt 1Z has 53% more lift (413 kg / 911 lb) than the Ford 1600 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,595 kg (3,516 lb)Traktorenlexikon, “Fendt Farmer 1 Z”1,040 kg (2,293 lb)Traktorenlexikon, “Ford 1600”Ahead (a fact, not an advantage)The Fendt 1Z is 53% heavier (555 kg / 1,224 lb) than the Ford 1600 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?2,040 kg (4,497 lb)Traktorenlexikon, “Fendt Farmer 1 Z”1,745 kg (3,847 lb)Traktorenlexikon, “Ford 1600”AheadThe Fendt 1Z has 17% higher maximum permissible mass (295 kg / 650 lb) than the Ford 1600 (A) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?6Traktorenlexikon, “Fendt Farmer 1 Z”9Traktorenlexikon, “Ford 1600”AheadThe Ford 1600 (A) has 50% more forward gears (3 gears) than the Fendt 1Z (both forward gears, as stated by the source).
Which offers a creeper range?YesTraktorenlexikon, “Fendt Farmer 1 Z”—No figureNo call on a creeper range: not stated for the 1600 (A).
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Fendt Farmer 1 Z”15 km/h (9.3 mph)Traktorenlexikon, “Ford 1600”AheadThe Fendt 1Z has 33% more top speed (5.0 km/h / 3.1 mph) than the Ford 1600 (A) (both top speed forward, as stated by the source).
Which offers more PTO speeds?585 rpmTraktorenlexikon, “Fendt Farmer 1 Z”540 rpmTraktorenlexikon, “Ford 1600”No figureNo call on PTO speeds: no standard PTO speed stated for the 1Z.
Which PTO runs independently of the ground drive?dependent (stops with the clutch)Traktorenlexikon, “Fendt Farmer 1 Z”—No figureNo call on PTO independence: not stated for the 1600 (A).
Which drives on both axles?2WDTraktorenlexikon, “Fendt Farmer 1 Z”Two-wheel or four-wheel driveTraktorenlexikon, “Ford 1600”AheadThe Ford 1600 (A) is available with four-wheel drive; the Fendt 1Z is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1963–19671976–1979Ahead (a fact, not an advantage)The Ford 1600 (A) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 1Z has 53% more lift (413 kg / 911 lb) than the Ford 1600 (A) (both lift at the hitch ends, as stated by the source).
  • The Fendt 1Z is 53% heavier (555 kg / 1,224 lb) than the Ford 1600 (A) (both unladen weight, as stated by the source).
  • The Fendt 1Z has 17% higher maximum permissible mass (295 kg / 650 lb) than the Ford 1600 (A) (both maximum permissible mass, as stated by the source).
  • The Ford 1600 (A) has 50% more forward gears (3 gears) than the Fendt 1Z (both forward gears, as stated by the source).
  • The Fendt 1Z has 33% more top speed (5.0 km/h / 3.1 mph) than the Ford 1600 (A) (both top speed forward, as stated by the source).
  • The Ford 1600 (A) is available with four-wheel drive; the Fendt 1Z is two-wheel drive (as stated by the sources).
  • The Ford 1600 (A) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Not comparable on power at the PTO shaft: the 1Z has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1600 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources