Fendt F 345 GT or Fiat 45-66 V (DT/V)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the F 345 GT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 45-66 V (DT/V) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt F 345 GT suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt F 345 GT and Fiat 45-66 V (DT/V), with the call on each
QuestionF 345 GT45-66 V (DT/V)Call
Which puts more power through the PTO shaft?32.9 kW (44.1 hp)Traktorenlexikon, “Fendt F 345 GT”33.1 kW (44.4 hp)Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”Not comparableNot comparable on power at the PTO shaft: the F 345 GT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 45-66 V (DT/V) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the F 345 GT and the 45-66 V (DT/V).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the F 345 GT and the 45-66 V (DT/V).
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the F 345 GT and the 45-66 V (DT/V).
Which lifts more on the three-point hitch?2,170 kg (4,784 lb)Traktorenlexikon, “Fendt F 345 GT”1,800 kg (3,968 lb)Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”Not comparableNot comparable on three-point lift: the F 345 GT: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt F 345 GT”); the 45-66 V (DT/V): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”) — not the same quantity, basis and condition.
Which is heavier, for traction?3,025 kg (6,669 lb)Traktorenlexikon, “Fendt F 345 GT”1,530 kg (3,373 lb)Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”Ahead (a fact, not an advantage)The Fendt F 345 GT is 98% heavier (1,495 kg / 3,296 lb) than the Fiat 45-66 V (DT/V) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,400 kg (11,905 lb)Traktorenlexikon, “Fendt F 345 GT”—No figureNo call on maximum permissible mass: no figure on record for the 45-66 V (DT/V).
Which has the wider choice of gears?20 to 21Traktorenlexikon, “Fendt F 345 GT”12 to 20Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the F 345 GT and the 45-66 V (DT/V).
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Fendt F 345 GT”30 km/h (18.6 mph)Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”AheadThe Fendt F 345 GT has 33% more top speed (10.0 km/h / 6.2 mph) than the Fiat 45-66 V (DT/V) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/750/1000 rpmTraktorenlexikon, “Fendt F 345 GT”540/1000 rpmTraktorenlexikon, “Fiat 45-66 V/45-66 V/DT”AheadThe Fendt F 345 GT offers 750 rpm at the PTO, which the Fiat 45-66 V (DT/V) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fendt F 345 GT”independentTraktorenlexikon, “Fiat 45-66 V/45-66 V/DT”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Fendt F 345 GT”Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 45-66 V/45-66 V/DT”AheadThe Fiat 45-66 V (DT/V) is available with four-wheel drive; the Fendt F 345 GT is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1984–19961985–1992EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt F 345 GT is 98% heavier (1,495 kg / 3,296 lb) than the Fiat 45-66 V (DT/V) (both unladen weight, as stated by the source).
  • The Fendt F 345 GT has 33% more top speed (10.0 km/h / 6.2 mph) than the Fiat 45-66 V (DT/V) (both top speed forward, as stated by the source).
  • The Fendt F 345 GT offers 750 rpm at the PTO, which the Fiat 45-66 V (DT/V) does not (as stated by the sources).
  • The Fiat 45-66 V (DT/V) is available with four-wheel drive; the Fendt F 345 GT is two-wheel drive (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the F 345 GT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 45-66 V (DT/V) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the F 345 GT: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt F 345 GT”); the 45-66 V (DT/V): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources