Fendt 924 Vario or New Holland TG 210 (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 924 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 924 Vario suits road haulage better on this data: 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 924 Vario and New Holland TG 210 (Traktorenlexikon), with the call on each
Question924 VarioTG 210Call
Which puts more power through the PTO shaft?154 kW (207 hp)Traktorenlexikon, “Fendt 924 Vario”154.5 kW (207.2 hp)Traktorenlexikon, “New Holland TG 210”Not comparableNot comparable on power at the PTO shaft: the 924 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 924 Vario and the TG 210.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 924 Vario and the TG 210.
Which pumps more oil for implements?—146.1 L/min (38.6 gpm)Traktorenlexikon, “New Holland TG 210”No figureNo call on hydraulic flow: no figure on record for the 924 Vario.
Which lifts more on the three-point hitch?—4,290 kg (9,458 lb)Traktorenlexikon, “New Holland TG 210”No figureNo call on three-point lift: no figure on record for the 924 Vario.
Which is heavier, for traction?10,080 kg (22,223 lb)Traktorenlexikon, “Fendt 924 Vario”9,283 kg (20,466 lb)Traktorenlexikon, “New Holland TG 210”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?15,000 kg (33,069 lb) to 18,000 kg (39,683 lb)Traktorenlexikon, “Fendt 924 Vario”14,000 kg (30,865 lb)Traktorenlexikon, “New Holland TG 210”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 924 Vario”18 to 24 forwardTraktorenlexikon, “New Holland TG 210”DifferTransmissions differ in kind: the Fendt 924 Vario is stepless (CVT) and the New Holland TG 210 has 18 to 24 forward gears — not called.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 924 Vario and the TG 210.
Which is faster on the road?50 km/h (31.1 mph) to 60 km/h (37.3 mph)Traktorenlexikon, “Fendt 924 Vario”40 km/h (24.9 mph)Traktorenlexikon, “New Holland TG 210”AheadThe Fendt 924 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the New Holland TG 210 (both top speed forward, as stated by the source).
Which offers more PTO speeds?—540 rpm / 1000 rpmTraktorenlexikon, “New Holland TG 210”No figureNo call on PTO speeds: no standard PTO speed stated for the 924 Vario.
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “New Holland TG 210”No figureNo call on PTO independence: not stated for the 924 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 924 Vario”; OECD test report 2545, 20104WDTraktorenlexikon, “New Holland TG 210”; OECD test report 2183, 2004EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2006–20142002–2005EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 924 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the New Holland TG 210 (both top speed forward, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Fendt 924 Vario is stepless (CVT) and the New Holland TG 210 has 18 to 24 forward gears — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 924 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources