Fendt 916 Vario or Hürlimann SX 1800?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 916 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 916 Vario suits road haulage better on this data: 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 916 Vario and Hürlimann SX 1800, with the call on each
Question916 VarioSX 1800Call
Which puts more power through the PTO shaft?132 kW (177 hp)Traktorenlexikon, “Fendt 916 Vario”132.4 kW (177.6 hp)Traktorenlexikon, “Hürlimann SX 1800”Not comparableNot comparable on power at the PTO shaft: the 916 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 916 Vario and the SX 1800.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 916 Vario and the SX 1800.
Which pumps more oil for implements?112 L/min (29.6 gpm)Traktorenlexikon, “Fendt 916 Vario”113.0 L/min (29.9 gpm)Traktorenlexikon, “Hürlimann SX 1800”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?9,734 kg (21,460 lb)Traktorenlexikon, “Fendt 916 Vario”10,000 kg (22,046 lb)Traktorenlexikon, “Hürlimann SX 1800”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?8,750 kg (19,290 lb)Traktorenlexikon, “Fendt 916 Vario”7,100 kg (15,653 lb)Traktorenlexikon, “Hürlimann SX 1800”Ahead (a fact, not an advantage)The Fendt 916 Vario is 23% heavier (1,650 kg / 3,638 lb) than the Hürlimann SX 1800 (both unladen weight, as stated by the source).
Which may carry more ballast and load?14,000 kg (30,865 lb)Traktorenlexikon, “Fendt 916 Vario”—No figureNo call on maximum permissible mass: no figure on record for the SX 1800.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 916 Vario”18 to 27 forwardTraktorenlexikon, “Hürlimann SX 1800”DifferTransmissions differ in kind: the Fendt 916 Vario is stepless (CVT) and the Hürlimann SX 1800 has 18 to 27 forward gears — not called.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 916 Vario and the SX 1800.
Which is faster on the road?50 km/h (31.1 mph)Traktorenlexikon, “Fendt 916 Vario”40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann SX 1800”AheadThe Fendt 916 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the Hürlimann SX 1800 (both top speed forward, as stated by the source).
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Fendt 916 Vario”540/1000 rpmTraktorenlexikon, “Hürlimann SX 1800”AheadThe Hürlimann SX 1800 offers 540 rpm at the PTO, which the Fendt 916 Vario does not (as stated by the sources).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Hürlimann SX 1800”No figureNo call on PTO independence: not stated for the 916 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 916 Vario”4WDTraktorenlexikon, “Hürlimann SX 1800”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2002–20062000–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 916 Vario is 23% heavier (1,650 kg / 3,638 lb) than the Hürlimann SX 1800 (both unladen weight, as stated by the source).
  • The Fendt 916 Vario has 25% more top speed (10.0 km/h / 6.2 mph) than the Hürlimann SX 1800 (both top speed forward, as stated by the source).
  • The Hürlimann SX 1800 offers 540 rpm at the PTO, which the Fendt 916 Vario does not (as stated by the sources).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Fendt 916 Vario is stepless (CVT) and the Hürlimann SX 1800 has 18 to 27 forward gears — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 916 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources