11 material differences · fewer than 12
Tractor oneFendt 828 Variofrom 2010No measured PTO figureTractor twoJohn Deere 8410 T2000–2002No measured PTO figure
Which should you choose?
Read our verdict on the 828 Vario and the 8410 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 828 Vario | 8410 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 275 hp | 266.5 hp | — |
| Engine declared | Deutz TCD 2012 L06 4V | John Deere-PowerTech 6.081 HRW-18 | differs |
| Displacement declared | 6.06 L | 8.13 L | +34% 8410 T |
| Maximum torque declared | 892 lb·ft · 1,210 N·m | 844 lb·ft · 1,144 N·m | +6% 828 Vario |
| Transmission | |||
| Top speed declared | 37.3 mph · 60 km/h | 18.6 mph · 30 km/h | +100% 828 Vario |
| Clutch declared | Multi-plate clutch | Pedal operated hydraulic wet John Deere multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 40.2 gpm · 152 L/min | 31.4 gpm · 118.9 L/min | +28% 828 Vario |
| Pressure declared | 2,901 psi · 200 bar | 2,944 psi · 203 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 20,834 lb · 9,450 kg | 26,378 lb · 11,965 kg | +27% 8410 T |
| Maximum permissible mass declared | — | 31,500 lb · 14,288 kg | — |
| Wheelbase declared | 114.2 in · 2,900 mm | 89.0 in · 2,260 mm | +28% 828 Vario |
| Length declared | 207.6 in · 5,274 mm | 216.0 in · 5,487 mm | — |
| Width declared | 103.1 in · 2,620 mm | 134.0–150.0 in · 3,404–3,810 mm | differs |
| Ground clearance declared | 22.3 in · 567 mm | 14.2 in · 360 mm | +57% 828 Vario |
| Fuel tank declared | 533.6 qt · 505 L | 519.9 qt · 492.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 828 Vario sources
- Source: Traktorenlexikon, “Fendt 828 Vario”
John Deere 8410 T sources
- Source: Traktorenlexikon, “John Deere 8410T”
- Source: OECD test report 1937, 2000