Fendt 820 Vario or Massey Ferguson MF 7497?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 820 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 7497 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 820 Vario | MF 7497 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 151 kW (202 hp)Traktorenlexikon, “Fendt 820 Vario” | 150.9 kW (202.4 hp)Traktorenlexikon, “Massey Ferguson MF 7497” | Not comparableNot comparable on power at the PTO shaft: the 820 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 7497 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 820 Vario and the MF 7497. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 820 Vario and the MF 7497. |
| Which pumps more oil for implements? | — | 119.0 L/min (31.4 gpm)Traktorenlexikon, “Massey Ferguson MF 7497” | No figureNo call on hydraulic flow: no figure on record for the 820 Vario. |
| Which lifts more on the three-point hitch? | 9,259 kg (20,413 lb)Traktorenlexikon, “Fendt 820 Vario” | 9,483 kg (20,907 lb)Traktorenlexikon, “Massey Ferguson MF 7497” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 7,185 kg (15,840 lb)Traktorenlexikon, “Fendt 820 Vario” | 7,426 kg (16,372 lb)Traktorenlexikon, “Massey Ferguson MF 7497” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 12,000 kg (26,455 lb)Traktorenlexikon, “Massey Ferguson MF 7497” | No figureNo call on maximum permissible mass: no figure on record for the 820 Vario. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “Fendt 820 Vario” | Stepless (CVT)Traktorenlexikon, “Massey Ferguson MF 7497” | EvenEven on gears: every machine is stepless. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 820 Vario and the MF 7497. |
| Which is faster on the road? | 50 km/h (31.1 mph)Traktorenlexikon, “Fendt 820 Vario” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Massey Ferguson MF 7497” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Fendt 820 Vario” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 7497” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 820 Vario and the MF 7497. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fendt 820 Vario”; OECD test report 2535, 2010 | 4WDTraktorenlexikon, “Massey Ferguson MF 7497” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2006–2011 | 2009–2012 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on gears: every machine is stepless.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 820 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 7497 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources