14 material differences
Tractor oneFendt 817 Vario-TMS2003–2009No measured PTO figureTractor twoNew Holland T 70302007–2011No measured PTO figure
Which should you choose?
Read our verdict on the 817 Vario-TMS and the T 7030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 817 Vario-TMS | T 7030 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 162 hp | 164.7 hp | — |
| Engine declared | Deutz BF6M 2013 C | IVECO-NEF 667 TA/EBN (TIER-III) | differs |
| Displacement declared | 5.70 L | 6.73 L | +18% T 7030 |
| Maximum torque declared | 575 lb·ft · 780 N·m | 540 lb·ft · 732 N·m | +7% 817 Vario-TMS |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Multi-disc clutch | Electro-hydraulically operated wet Case-New Holland multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 29.1 gpm · 110.0 L/min | 32.0 gpm · 121.0 L/min | +10% T 7030 |
| Pressure declared | 2,901 psi · 200 bar | 3,336 psi · 230 bar | +15% T 7030 |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,661 lb · 6,650 kg | 17,891 lb · 8,115 kg | +22% T 7030 |
| Maximum permissible mass declared | 27,558 lb · 12,500 kg | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 107.1 in · 2,720 mm | 113.5 in · 2,884 mm | +6% T 7030 |
| Length declared | 185.0 in · 4,700 mm | 201.2 in · 5,110 mm | +9% T 7030 |
| Width declared | 100.4 in · 2,550 mm | 84.1–133.7 in · 2,135–3,395 mm | differs |
| Ground clearance declared | 22.4 in · 570 mm | 17.7 in · 450 mm | +27% 817 Vario-TMS |
| Turning radius, braked declared | 16.7 ft · 5.10 m | — | — |
| Fuel tank declared | 359.3 qt · 340 L | 428.0 qt · 405.0 L | +19% T 7030 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 817 Vario-TMS sources
Source
- Source: Traktorenlexikon, “Fendt 817 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
New Holland T 7030 sources
Source
- Source: Traktorenlexikon, “New Holland T7030 Power Command”