Fendt 815 Vario / TMS or Renault 160-94 TZ/TX?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 815 Vario / TMS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 160-94 TZ/TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 815 Vario / TMS suits loader and hydraulic implement work better on this data: 87% (51.3 L/min / 13.6 gpm) more hydraulic flow.
  • The Fendt 815 Vario / TMS suits road haulage better on this data: 28% (2,750 kg / 6,063 lb) more maximum permissible mass and 25% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 815 Vario / TMS and Renault 160-94 TZ/TX, with the call on each
Question815 Vario / TMS160-94 TZ/TXCall
Which puts more power through the PTO shaft?110 kW (148 hp)Traktorenlexikon, “Fendt 815 Vario”110.4 kW (148.0 hp)Traktorenlexikon, “Renault 160-94 TX/TZ R3842”Not comparableNot comparable on power at the PTO shaft: the 815 Vario / TMS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 160-94 TZ/TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 815 Vario / TMS and the 160-94 TZ/TX.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 815 Vario / TMS and the 160-94 TZ/TX.
Which pumps more oil for implements?110.0 L/min (29.1 gpm)Traktorenlexikon, “Fendt 815 Vario”58.7 L/min (15.5 gpm)Traktorenlexikon, “Renault 160-94 TX/TZ R3842”AheadThe Fendt 815 Vario / TMS has 87% more hydraulic flow (51.3 L/min / 13.6 gpm) than the Renault 160-94 TZ/TX (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?9,255 kg (20,404 lb)Traktorenlexikon, “Fendt 815 Vario”11,020 kg (24,295 lb)Traktorenlexikon, “Renault 160-94 TX/TZ R3842”Not comparableNot comparable on three-point lift: the 815 Vario / TMS: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 815 Vario”); the 160-94 TZ/TX: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Renault 160-94 TX/TZ R3842”) — not the same quantity, basis and condition.
Which is heavier, for traction?6,650 kg (14,661 lb)Traktorenlexikon, “Fendt 815 Vario”6,275 kg (13,834 lb)Traktorenlexikon, “Renault 160-94 TX/TZ R3842”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?12,500 kg (27,558 lb)Traktorenlexikon, “Fendt 815 Vario”9,750 kg (21,495 lb)Traktorenlexikon, “Renault 160-94 TX/TZ R3842”AheadThe Fendt 815 Vario / TMS has 28% higher maximum permissible mass (2,750 kg / 6,063 lb) than the Renault 160-94 TZ/TX (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 815 Vario”27 forwardTraktorenlexikon, “Renault 160-94 TX/TZ R3842”DifferTransmissions differ in kind: the Fendt 815 Vario / TMS is stepless (CVT) and the Renault 160-94 TZ/TX has 27 forward gears — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 815 Vario / TMS and the 160-94 TZ/TX.
Which is faster on the road?50 km/h (31.1 mph)Traktorenlexikon, “Fendt 815 Vario”40 km/h (24.9 mph)Traktorenlexikon, “Renault 160-94 TX/TZ R3842”AheadThe Fendt 815 Vario / TMS has 25% more top speed (10.0 km/h / 6.2 mph) than the Renault 160-94 TZ/TX (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/750/1000 rpmTraktorenlexikon, “Fendt 815 Vario”540/1000 rpmTraktorenlexikon, “Renault 160-94 TX/TZ R3842”AheadThe Fendt 815 Vario / TMS offers 750 rpm at the PTO, which the Renault 160-94 TZ/TX does not (as stated by the sources).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 815 Vario / TMS and the 160-94 TZ/TX.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 815 Vario”4WDTraktorenlexikon, “Renault 160-94 TX/TZ R3842”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2003–20091993–1997Ahead (a fact, not an advantage)The Fendt 815 Vario / TMS is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 815 Vario / TMS has 87% more hydraulic flow (51.3 L/min / 13.6 gpm) than the Renault 160-94 TZ/TX (both pump flow, as stated by the source).
  • The Fendt 815 Vario / TMS has 28% higher maximum permissible mass (2,750 kg / 6,063 lb) than the Renault 160-94 TZ/TX (both maximum permissible mass, as stated by the source).
  • The Fendt 815 Vario / TMS has 25% more top speed (10.0 km/h / 6.2 mph) than the Renault 160-94 TZ/TX (both top speed forward, as stated by the source).
  • The Fendt 815 Vario / TMS offers 750 rpm at the PTO, which the Renault 160-94 TZ/TX does not (as stated by the sources).
  • The Fendt 815 Vario / TMS is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Fendt 815 Vario / TMS is stepless (CVT) and the Renault 160-94 TZ/TX has 27 forward gears — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 815 Vario / TMS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 160-94 TZ/TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 815 Vario / TMS: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 815 Vario”); the 160-94 TZ/TX: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Renault 160-94 TX/TZ R3842”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources