Fendt 815 Vario / TMS or Lamborghini R.1506 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 815 Vario / TMS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R.1506 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt 815 Vario / TMS suits loader and hydraulic implement work better on this data: 66% (43.8 L/min / 11.6 gpm) more hydraulic flow.
  • The Fendt 815 Vario / TMS suits road haulage better on this data: 67% (20.0 km/h / 12.4 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 815 Vario / TMS and Lamborghini R.1506 DT, with the call on each
Question815 Vario / TMSR.1506 DTCall
Which puts more power through the PTO shaft?110 kW (148 hp)Traktorenlexikon, “Fendt 815 Vario”110.3 kW (147.9 hp)Traktorenlexikon, “Lamborghini R.1506 DT”Not comparableNot comparable on power at the PTO shaft: the 815 Vario / TMS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R.1506 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 815 Vario / TMS and the R.1506 DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 815 Vario / TMS and the R.1506 DT.
Which pumps more oil for implements?110.0 L/min (29.1 gpm)Traktorenlexikon, “Fendt 815 Vario”66.2 L/min (17.5 gpm)Traktorenlexikon, “Lamborghini R.1506 DT”AheadThe Fendt 815 Vario / TMS has 66% more hydraulic flow (43.8 L/min / 11.6 gpm) than the Lamborghini R.1506 DT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?9,255 kg (20,404 lb)Traktorenlexikon, “Fendt 815 Vario”6,680 kg (14,727 lb)Traktorenlexikon, “Lamborghini R.1506 DT”Not comparableNot comparable on three-point lift: the 815 Vario / TMS: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 815 Vario”); the R.1506 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini R.1506 DT”) — not the same quantity, basis and condition.
Which is heavier, for traction?6,650 kg (14,661 lb)Traktorenlexikon, “Fendt 815 Vario”5,695 kg (12,555 lb)Traktorenlexikon, “Lamborghini R.1506 DT”Ahead (a fact, not an advantage)The Fendt 815 Vario / TMS is 17% heavier (955 kg / 2,105 lb) than the Lamborghini R.1506 DT (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,500 kg (27,558 lb)Traktorenlexikon, “Fendt 815 Vario”No figureNo call on maximum permissible mass: no figure on record for the R.1506 DT.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 815 Vario”16 to 24 forwardTraktorenlexikon, “Lamborghini R.1506 DT”DifferTransmissions differ in kind: the Fendt 815 Vario / TMS is stepless (CVT) and the Lamborghini R.1506 DT has 16 to 24 forward gears — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 815 Vario / TMS and the R.1506 DT.
Which is faster on the road?50 km/h (31.1 mph)Traktorenlexikon, “Fendt 815 Vario”30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini R.1506 DT”AheadThe Fendt 815 Vario / TMS has 67% more top speed (20.0 km/h / 12.4 mph) than the Lamborghini R.1506 DT (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/750/1000 rpmTraktorenlexikon, “Fendt 815 Vario”540/1000 rpmTraktorenlexikon, “Lamborghini R.1506 DT”AheadThe Fendt 815 Vario / TMS offers 750 rpm at the PTO, which the Lamborghini R.1506 DT does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Lamborghini R.1506 DT”No figureNo call on PTO independence: not stated for the 815 Vario / TMS.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 815 Vario”4WDTraktorenlexikon, “Lamborghini R.1506 DT”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2003–20092004–EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 815 Vario / TMS has 66% more hydraulic flow (43.8 L/min / 11.6 gpm) than the Lamborghini R.1506 DT (both pump flow, as stated by the source).
  • The Fendt 815 Vario / TMS is 17% heavier (955 kg / 2,105 lb) than the Lamborghini R.1506 DT (both unladen weight, as stated by the source).
  • The Fendt 815 Vario / TMS has 67% more top speed (20.0 km/h / 12.4 mph) than the Lamborghini R.1506 DT (both top speed forward, as stated by the source).
  • The Fendt 815 Vario / TMS offers 750 rpm at the PTO, which the Lamborghini R.1506 DT does not (as stated by the sources).
  • Transmissions differ in kind: the Fendt 815 Vario / TMS is stepless (CVT) and the Lamborghini R.1506 DT has 16 to 24 forward gears — not called.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 815 Vario / TMS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R.1506 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 815 Vario / TMS: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 815 Vario”); the R.1506 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini R.1506 DT”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources