6 material differences · fewer than 12
Tractor oneFendt 815 Vario / TMS2003–2009No measured PTO figureTractor twoFendt 515 C1995–1999No measured PTO figure
Which should you choose?
Read our verdict on the 815 Vario / TMS and the 515 C → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 815 Vario / TMS | 515 C | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 148 hp | 148 hp | — |
| Engine declared | Deutz BF6M 2013 C | — | — |
| Displacement declared | 5.70 L | — | — |
| Maximum torque declared | 538 lb·ft · 730 N·m | 423 lb·ft · 574 N·m | +27% 815 Vario / TMS |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Wet multi-plate clutch as drive clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 29.1 gpm · 110.0 L/min | 24.6 gpm · 93.0 L/min | +18% 815 Vario / TMS |
| Pressure declared | — | 2,973 psi · 205 bar | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,661 lb · 6,650 kg | 12,214 lb · 5,540 kg | +20% 815 Vario / TMS |
| Maximum permissible mass declared | 27,558 lb · 12,500 kg | — | — |
| Wheelbase declared | 107.1 in · 2,720 mm | 102.7 in · 2,609 mm | — |
| Length declared | 185.0 in · 4,700 mm | 176.4 in · 4,480 mm | — |
| Width declared | 100.4 in · 2,550 mm | 96.1 in · 2,440 mm | — |
| Ground clearance declared | 22.4 in · 570 mm | 22.7 in · 576 mm | — |
| Turning radius, braked declared | 16.7 ft · 5.10 m | 16.1 ft · 4.90 m | — |
| Fuel tank declared | 359.3 qt · 340 L | 221.9 qt · 210 L | +62% 815 Vario / TMS |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 815 Vario / TMS sources
- Source: Traktorenlexikon, “Fendt 815 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
Fendt 515 C sources
- Source: Traktorenlexikon, “Fendt Favorit 515 C”