Fendt 724 Vario or Massey Ferguson MF 8460?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 724 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8460 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 8460 suits road haulage better on this data: 12% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 724 Vario and Massey Ferguson MF 8460, with the call on each
Question724 VarioMF 8460Call
Which puts more power through the PTO shaft?174 kW (233 hp)Traktorenlexikon, “Fendt 724 Vario”173 kW (232 hp)Traktorenlexikon, “Massey Ferguson MF 8460”Not comparableNot comparable on power at the PTO shaft: the 724 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8460 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 724 Vario and the MF 8460.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 724 Vario and the MF 8460.
Which pumps more oil for implements?—150.0 L/min (39.6 gpm)Traktorenlexikon, “Massey Ferguson MF 8460”No figureNo call on hydraulic flow: no figure on record for the 724 Vario.
Which lifts more on the three-point hitch?9,769 kg (21,537 lb)Traktorenlexikon, “Fendt 724 Vario”10,707 kg (23,605 lb)Traktorenlexikon, “Massey Ferguson MF 8460”Not comparableNot comparable on three-point lift: the 724 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 724 Vario”); the MF 8460: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 8460”) — not the same quantity, basis and condition.
Which is heavier, for traction?7,900 kg (17,417 lb)Traktorenlexikon, “Fendt 724 Vario”9,040 kg (19,930 lb)Traktorenlexikon, “Massey Ferguson MF 8460”Ahead (a fact, not an advantage)The Massey Ferguson 8460 is 14% heavier (1,140 kg / 2,513 lb) than the Fendt 724 Vario (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,500 kg (27,558 lb)Traktorenlexikon, “Fendt 724 Vario”14,000 kg (30,865 lb)Traktorenlexikon, “Massey Ferguson MF 8460”AheadThe Massey Ferguson 8460 has 12% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fendt 724 Vario (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 724 Vario”Stepless (CVT)Traktorenlexikon, “Massey Ferguson MF 8460”EvenEven on gears: every machine is stepless.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 724 Vario and the MF 8460.
Which is faster on the road?50 km/h (31.1 mph)Traktorenlexikon, “Fendt 724 Vario”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Massey Ferguson MF 8460”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “Fendt 724 Vario”540/1000/540E rpmTraktorenlexikon, “Massey Ferguson MF 8460”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 724 Vario and the MF 8460.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 724 Vario”4WDTraktorenlexikon, “Massey Ferguson MF 8460”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2011–2004–2008Ahead (a fact, not an advantage)The Fendt 724 Vario is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 8460 is 14% heavier (1,140 kg / 2,513 lb) than the Fendt 724 Vario (both unladen weight, as stated by the source).
  • The Massey Ferguson 8460 has 12% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fendt 724 Vario (both maximum permissible mass, as stated by the source).
  • The Fendt 724 Vario is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on gears: every machine is stepless.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 724 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8460 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 724 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 724 Vario”); the MF 8460: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 8460”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources