11 material differences · fewer than 12
Tractor oneFendt 722 Variofrom 2011No measured PTO figureTractor twoNew Holland T 80102006–2011No measured PTO figure
Which should you choose?
Read our verdict on the 722 Vario and the T 8010 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 722 Vario | T 8010 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 219 hp | 217.9 hp | — |
| Engine declared | Deutz TCD 6.1 L6 4V | CUMMINS 6 TAA-8304 (TIER-III) | differs |
| Displacement declared | 6.06 L | 8.27 L | +37% T 8010 |
| Maximum torque declared | 729 lb·ft · 988 N·m | 673 lb·ft · 913 N·m | +8% 722 Vario |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 28.8 gpm · 109.0 L/min | 44.0 gpm · 166.6 L/min | +53% T 8010 |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,417 lb · 7,900 kg | 21,325 lb · 9,673 kg | +22% T 8010 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 109.6 in · 2,783 mm | 121.2 in · 3,078 mm | +11% T 8010 |
| Length declared | 206.3 in · 5,240 mm | 229.5 in · 5,829 mm | +11% T 8010 |
| Width declared | 100.4 in · 2,550 mm | 98.0 in · 2,490 mm | — |
| Ground clearance declared | 21.7 in · 552 mm | 14.6 in · 372 mm | +48% 722 Vario |
| Fuel tank declared | 422.7 qt · 400 L | 720.7 qt · 682.0 L | +71% T 8010 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 722 Vario sources
- Source: Traktorenlexikon, “Fendt 722 Vario”
- Source: Traktorenlexikon, “Fendt 720 Vario”
New Holland T 8010 sources
- Source: Traktorenlexikon, “New Holland T8010”
- Source: Traktorenlexikon, “New Holland T8040”