10 material differences · fewer than 12
Tractor oneFendt 722 Variofrom 2011No measured PTO figureTractor twoJohn Deere 79302007–2011No measured PTO figure
Which should you choose?
Read our verdict on the 722 Vario and the 7930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 722 Vario | 7930 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 219 hp | 217.1 hp | — |
| Engine declared | Deutz TCD 6.1 L6 4V | John Deere PowrTech-Plus 6.068 HRW-65/V4-CR | differs |
| Displacement declared | 6.06 L | 6.78 L | +12% 7930 |
| Maximum torque declared | 729 lb·ft · 988 N·m | 653 lb·ft · 885 N·m | +12% 722 Vario |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 18.6–31.1 mph · 30–50 km/h | differs |
| Clutch declared | multi-plate clutch | Pedal-operated hydraulic wet multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 28.8 gpm · 109.0 L/min | 32.0 gpm · 121.1 L/min | +11% 7930 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,417 lb · 7,900 kg | 17,730 lb · 8,042 kg | — |
| Maximum permissible mass declared | — | 28,881 lb · 13,100 kg | — |
| Wheelbase declared | 109.6 in · 2,783 mm | 112.6 in · 2,860 mm | — |
| Length declared | 206.3 in · 5,240 mm | 212.4 in · 5,394 mm | — |
| Width declared | 100.4 in · 2,550 mm | 86.9–110.5 in · 2,208–2,807 mm | differs |
| Ground clearance declared | 21.7 in · 552 mm | 27.2 in · 690 mm | +25% 7930 |
| Fuel tank declared | 422.7 qt · 400 L | 378.3–414.2 qt · 358.0–392.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 722 Vario sources
- Source: Traktorenlexikon, “Fendt 722 Vario”
- Source: Traktorenlexikon, “Fendt 720 Vario”
John Deere 7930 sources
- Source: Traktorenlexikon, “John Deere 7930”
- Source: OECD test report 2408, 2008