5 material differences · fewer than 12
Tractor oneFendt 720 Variofrom 2011No measured PTO figureTractor twoFendt Favorit 920 Vario1997–2002No measured PTO figure
Which should you choose?
Read our verdict on the 720 Vario and the Favorit 920 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 720 Vario | Favorit 920 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 198 hp | 197 hp | — |
| Engine declared | Deutz TCD 6.1 L6 4V | MAN D 826 LE 530 | differs |
| Displacement declared | 6.06 L | 6.87 L | +13% Favorit 920 Vario |
| Maximum torque declared | 662 lb·ft · 897 N·m | 652 lb·ft · 884 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 31.1 mph · 50 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 750 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,417–17,593 lb · 7,900–7,980 kg | 17,835 lb · 8,090 kg | — |
| Maximum permissible mass declared | 29,762 lb · 13,500 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 109.1–109.6 in · 2,770–2,783 mm | 111.8 in · 2,840 mm | — |
| Length declared | 205.8–206.3 in · 5,227–5,240 mm | 194.5 in · 4,940 mm | differs |
| Width declared | 100.4 in · 2,550 mm | 100.4 in · 2,550 mm | — |
| Ground clearance declared | 19.9–21.7 in · 506–552 mm | 23.8 in · 605 mm | differs |
| Turning radius, braked declared | — | 17.7 ft · 5.40 m | — |
| Fuel tank declared | 422.7 qt · 400 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 720 Vario sources
- Source: Traktorenlexikon, “Fendt 720 Vario”
Fendt Favorit 920 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 920 Vario”