8 material differences · fewer than 12
Tractor oneFendt 712 Vario1999–2012No measured PTO figureTractor twoFendt Favorit 711 Variofrom 1999No measured PTO figure
Which should you choose?
Read our verdict on the 712 Vario and the Favorit 711 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 712 Vario | Favorit 711 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 114 hp | 113.7 hp | — |
| Engine declared | Deutz AG TCD 2012 LO6 | Deutz BF6M 2013 C | differs |
| Displacement declared | 6.06 L | 5.70 L | +6% 712 Vario |
| Maximum torque declared | 421 lb·ft · 571 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 31.1 mph · 50 km/h | differs |
| Clutch declared | Multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 29.1 gpm · 110.0 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 750 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,562 lb · 6,605 kg | 12,456–13,603 lb · 5,650–6,170 kg | differs |
| Maximum permissible mass declared | 25,353 lb · 11,500 kg | 20,944 lb · 9,500 kg | +21% 712 Vario |
| Wheelbase declared | 106.3 in · 2,700 mm | 106.3 in · 2,700 mm | — |
| Length declared | 183.8 in · 4,669 mm | 181.7–182.7 in · 4,615–4,640 mm | — |
| Width declared | 99.2 in · 2,520 mm | 94.1–95.6 in · 2,390–2,429 mm | differs |
| Ground clearance declared | 21.7 in · 552 mm | 20.8 in · 528 mm | — |
| Turning radius, braked declared | — | 16.1 ft · 4.90 m | — |
| Fuel tank declared | 359.3 qt · 340 L | 317.0 qt · 300 L | +13% 712 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 712 Vario sources
- Source: Traktorenlexikon, “Fendt 712 Vario”
Fendt Favorit 711 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 711 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”