5 material differences · fewer than 12
Tractor oneFendt Vario 514from 2013No measured PTO figureTractor twoSteyr 4130 Expert / MY23from 2023No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2013–2013; 2023–2023). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Vario 514 | 4130 Expert / MY23 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133 hp | 129 hp | — |
| Engine declared | Deutz TCD 4.1 L4-4V | — | — |
| Displacement declared | 4.04 L | — | — |
| Maximum torque declared | 479 lb·ft · 649 N·m | — | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9 mph · 40 km/h | +25% Vario 514 |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 29.1 gpm · 110 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,110 lb · 6,400 kg | 12,125 lb · 5,500 kg | +16% Vario 514 |
| Maximum permissible mass declared | 23,149 lb · 10,500 kg | — | — |
| Wheelbase declared | 100.8 in · 2,560 mm | 98.0 in · 2,490 mm | — |
| Length declared | 175.3 in · 4,453 mm | 188.3 in · 4,784 mm | +7% 4130 Expert / MY23 |
| Width declared | 96.5 in · 2,451 mm | 87.7 in · 2,228 mm | +10% Vario 514 |
| Ground clearance declared | 20.9 in · 530 mm | — | — |
| Fuel tank declared | 314.9 qt · 298 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Vario 514 sources
- Source: Traktorenlexikon, “Fendt 514 Vario”
- Source: Traktorenlexikon, “Fendt 516 Vario”
Steyr 4130 Expert / MY23 sources
- Source: Traktorenlexikon, “Steyr 4130 Expert / MY23”