11 material differences · fewer than 12
Tractor oneFendt Vario 513from 2013No measured PTO figureTractor twoJohn Deere 65342009–2012No measured PTO figure
Which should you choose?
Read our verdict on the Vario 513 and the 6534 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Vario 513 | 6534 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | Deutz TCD 4.1 L4-4V | John Deere PowrTech 4.045 HL/V2-CR | differs |
| Displacement declared | 4.04 L | 4.53 L | +12% 6534 |
| Maximum torque declared | 435 lb·ft · 590 N·m | 361 lb·ft · 490 N·m | +20% Vario 513 |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9 mph · 40 km/h | +25% Vario 513 |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pressure declared | — | 3,408 psi · 235 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540E/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,338 lb · 6,050 kg | 11,199 lb · 5,080 kg | +19% Vario 513 |
| Maximum permissible mass declared | 23,149 lb · 10,500 kg | 18,739 lb · 8,500 kg | +24% Vario 513 |
| Wheelbase declared | 100.8 in · 2,560 mm | 104.3 in · 2,650 mm | — |
| Length declared | 175.3 in · 4,453 mm | 186.1 in · 4,728 mm | +6% 6534 |
| Width declared | 96.5 in · 2,451 mm | 91.2 in · 2,316 mm | +6% Vario 513 |
| Ground clearance declared | 20.9 in · 530 mm | 23.6 in · 600 mm | +13% 6534 |
| Fuel tank declared | 314.9 qt · 298 L | 218.7 qt · 207.0 L | +44% Vario 513 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Vario 513 sources
- Source: Traktorenlexikon, “Fendt 513 Vario”
- Source: Traktorenlexikon, “Fendt 516 Vario”
John Deere 6534 sources
- Source: Traktorenlexikon, “John Deere 6534”
- Source: Traktorenlexikon, “John Deere 6430”