5 material differences · fewer than 12
Tractor oneFendt 512 Variofrom 2012No measured PTO figureTractor twoSteyr 4110 Expertfrom 2019No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2012–2012; 2019–2019). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 512 Vario | 4110 Expert | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 109 hp | 109 hp | — |
| Engine declared | Deutz TCD 4.1 L4-4V | — | — |
| Displacement declared | 4.04 L | — | — |
| Maximum torque declared | 406 lb·ft · 550 N·m | — | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9 mph · 40 km/h | +25% 512 Vario |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 29.1 gpm · 110 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,338 lb · 6,050 kg | 12,125 lb · 5,500 kg | +10% 512 Vario |
| Maximum permissible mass declared | 23,149 lb · 10,500 kg | — | — |
| Wheelbase declared | 100.8 in · 2,560 mm | 98.0 in · 2,490 mm | — |
| Length declared | 175.3 in · 4,453 mm | 188.3 in · 4,784 mm | +7% 4110 Expert |
| Width declared | 96.5 in · 2,451 mm | 87.7 in · 2,228 mm | +10% 512 Vario |
| Ground clearance declared | 20.9 in · 530 mm | — | — |
| Fuel tank declared | 314.9 qt · 298 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 512 Vario sources
- Source: Traktorenlexikon, “Fendt 512 Vario”
- Source: Traktorenlexikon, “Fendt 516 Vario”
Steyr 4110 Expert sources
- Source: Traktorenlexikon, “Steyr 4110 Expert”