Fendt 415 Vario or VALMET 8450?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 415 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8450 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt 415 Vario and VALMET 8450, with the call on each
Question415 Vario8450Call
Which puts more power through the PTO shaft?103 kW (138 hp)Traktorenlexikon, “Fendt 415 Vario”103 kW (138 hp)Traktorenlexikon, “Valmet Mega-8450”Not comparableNot comparable on power at the PTO shaft: the 415 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8450 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 415 Vario and the 8450.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 415 Vario and the 8450.
Which pumps more oil for implements?73.6 L/min (19.4 gpm)Traktorenlexikon, “Valmet Mega-8450”No figureNo call on hydraulic flow: no figure on record for the 415 Vario.
Which lifts more on the three-point hitch?7,549 kg (16,643 lb)Traktorenlexikon, “Fendt 415 Vario”6,900 kg (15,212 lb)Traktorenlexikon, “Valmet Mega-8450”Not comparableNot comparable on three-point lift: the 415 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 415 Vario”); the 8450: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet Mega-8450”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,450 kg (12,015 lb)Traktorenlexikon, “Fendt 415 Vario”5,310 kg (11,707 lb)Traktorenlexikon, “Valmet Mega-8450”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “Valmet Mega-8450”No figureNo call on maximum permissible mass: no figure on record for the 415 Vario.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Fendt 415 Vario”36 forwardTraktorenlexikon, “Valmet Mega-8450”DifferTransmissions differ in kind: the Fendt 415 Vario is stepless (CVT) and the VALMET 8450 has 36 forward gears — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 415 Vario and the 8450.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt 415 Vario”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8450”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/750/1000 rpmTraktorenlexikon, “Fendt 415 Vario”540/1000 rpmTraktorenlexikon, “Valmet Mega-8450”AheadThe Fendt 415 Vario offers 750 rpm at the PTO, which the VALMET 8450 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Valmet Mega-8450”No figureNo call on PTO independence: not stated for the 415 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Fendt 415 Vario”4WDTraktorenlexikon, “Valmet Mega-8450”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2006–20131995–2001Ahead (a fact, not an advantage)The Fendt 415 Vario is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt 415 Vario offers 750 rpm at the PTO, which the VALMET 8450 does not (as stated by the sources).
  • The Fendt 415 Vario is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Fendt 415 Vario is stepless (CVT) and the VALMET 8450 has 36 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 415 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8450 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 415 Vario: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt 415 Vario”); the 8450: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet Mega-8450”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources