4 material differences · fewer than 12
Tractor oneFendt 414 Vario2006–2013No measured PTO figureTractor twoSteyr 4130 Expertfrom 2019No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2006–2013; 2019–2019). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 414 Vario | 4130 Expert | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 129 hp | 129 hp | — |
| Engine declared | Deutz TCD 2012 L4-4V | — | — |
| Displacement declared | 4.04 L | — | — |
| Maximum torque declared | 452 lb·ft · 613 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Turbo clutch function | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 29.1 gpm · 110 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,015 lb · 5,450 kg | 12,125 lb · 5,500 kg | — |
| Wheelbase declared | 95.2 in · 2,417 mm | 98.0 in · 2,490 mm | — |
| Length declared | 168.5 in · 4,281 mm | 188.3 in · 4,784 mm | +12% 4130 Expert |
| Width declared | 96.1 in · 2,440 mm | 87.7 in · 2,228 mm | +10% 414 Vario |
| Ground clearance declared | 19.0 in · 482 mm | — | — |
| Fuel tank declared | 258.9 qt · 245 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 414 Vario sources
- Source: Traktorenlexikon, “Fendt 414 Vario”
- Source: Traktorenlexikon, “Fendt 411 Vario”
Steyr 4130 Expert sources
- Source: Traktorenlexikon, “Steyr 4130 Expert”