8 material differences · fewer than 12
Tractor oneFendt 414 Vario2006–2013No measured PTO figureTractor twoJohn Deere 6630 Premium2006–2011No measured PTO figure
Which should you choose?
Read our verdict on the 414 Vario and the 6630 Premium → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 414 Vario | 6630 Premium | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 129 hp | 128.3 hp | — |
| Engine declared | Deutz TCD 2012 L4-4V | John Deere PowrTech-Plus 6.068 HL-480/V4-CR | differs |
| Displacement declared | 4.04 L | 6.79 L | +68% 6630 Premium |
| Maximum torque declared | 452 lb·ft · 613 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9–31.1 mph · 40–50 km/h | — |
| Clutch declared | Turbo clutch function | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 18.8 gpm · 71.0 L/min | — |
| Pressure declared | — | 2,785–3,002 psi · 192–207 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540E/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,015 lb · 5,450 kg | 11,530 lb · 5,230 kg | — |
| Maximum permissible mass declared | — | 22,046 lb · 10,000 kg | — |
| Wheelbase declared | 95.2 in · 2,417 mm | 104.3 in · 2,650 mm | +10% 6630 Premium |
| Length declared | 168.5 in · 4,281 mm | 186.1 in · 4,728 mm | +10% 6630 Premium |
| Width declared | 96.1 in · 2,440 mm | 91.2 in · 2,316 mm | +5% 414 Vario |
| Ground clearance declared | 19.0 in · 482 mm | 22.4 in · 570 mm | +18% 6630 Premium |
| Fuel tank declared | 258.9 qt · 245 L | 218.7 qt · 207.0 L | +18% 414 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 414 Vario sources
- Source: Traktorenlexikon, “Fendt 414 Vario”
- Source: Traktorenlexikon, “Fendt 411 Vario”
John Deere 6630 Premium sources
- Source: Traktorenlexikon, “John Deere 6630P”