4 material differences · fewer than 12
Tractor oneFendt 411 Vario2006–2013No measured PTO figureTractor twoSteyr 4100 Expertfrom 2019No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (2006–2013; 2019–2019). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 411 Vario | 4100 Expert | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 99 hp | 99 hp | — |
| Engine declared | Deutz TCD 2012 L4-4V | — | — |
| Displacement declared | 4.04 L | — | — |
| Maximum torque declared | 372 lb·ft · 505 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | turbo clutch function | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 19.8 gpm · 75.0 L/min | 29.1 gpm · 110 L/min | +47% 4100 Expert |
| Pressure declared | 2,901 psi · 200 bar | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,905 lb · 5,400 kg | 12,125 lb · 5,500 kg | — |
| Wheelbase declared | 95.2 in · 2,417 mm | 98.0 in · 2,490 mm | — |
| Length declared | 167.4 in · 4,252 mm | 188.3 in · 4,784 mm | +13% 4100 Expert |
| Width declared | 92.1 in · 2,340 mm | 87.7 in · 2,228 mm | — |
| Ground clearance declared | 18.2 in · 462 mm | — | — |
| Fuel tank declared | 258.9 qt · 245 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 411 Vario sources
- Source: Traktorenlexikon, “Fendt 411 Vario”
Steyr 4100 Expert sources
- Source: Traktorenlexikon, “Steyr 4100 Expert”