6 material differences · fewer than 12

Tractor oneFahr 221940–1942No measured PTO figureTractor twoLanz D 75111934–1935No measured PTO figure

Which should you choose?

Read our verdict on the 22 and the D 7511 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

Fahr 22 and Lanz D 7511, field by field
Field22D 7511Gap
Engine
Engine power, claimed claimed21.7 hp19.6 hp+11% 22
Engine declaredDeutz F2M 414——
Displacement declared2.20 L——
Maximum torque declared88 lb·ft · 120 N·m——
Transmission
Top speed declared5.0–11.8 mph · 8.0–19.0 km/h——
Clutch declaredPedal-operated dry Fichtel & Sachs single-disc clutchPedal operated three-shoe clutch including clutch brakediffers
Hydraulics & hitch
Rear PTO speeds declared540 rpm760differs
Weight & dimensions
Unladen weight declared4,145 lb · 1,880 kg7,143 lb · 3,240 kg+72% D 7511
Maximum permissible mass declared4,850 lb · 2,200 kg——
Wheelbase declared66.9 in · 1,700 mm64.8 in · 1,645 mm—
Length declared119.1 in · 3,025 mm107.7 in · 2,735 mm+11% 22
Width declared62.5 in · 1,588 mm63.4 in · 1,610 mm—
Ground clearance declared11.4 in · 290 mm8.5 in · 215 mm+35% 22
Fuel tank declared37.0 qt · 35 L52.8 qt · 50 L+43% D 7511

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fahr 22 sources

Source
  • Source: Traktorenlexikon, “Fahr T 22”
  • Source: Traktorenlexikon, “Fahr F 22”

Lanz D 7511 sources

Source
  • Source: Traktorenlexikon, “Lanz D 7511/2”