Fahr 22 vs International Harvester DED (3)

10 material differences · fewer than 12

Tractor one

Fahr 22

1940–1942

No measured PTO figure

Tractor two

International Harvester DED (3)

1953–1956

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (53%); they were not built in overlapping years (1940–1942; 1953–1956). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 2 fields identical or within 5%, which is not counted as material

Fahr 22 and International Harvester DED (3), field by field
Field22DED (3)Gap
Engine
Engine power, claimed claimed21.7 hp19.7 hp+10% 22
Engine declaredDeutz F2M 414IHC DD 99differs
Displacement declared2.20 L1.63 L+35% 22
Maximum torque declared88 lb·ft · 120 N·m60 lb·ft · 81 N·m+48% 22
Transmission
Top speed declared5.0–11.8 mph · 8.0–19.0 km/h12.9 mph · 20.7 km/hdiffers
Clutch declaredPedal-operated dry Fichtel & Sachs single-disc clutchSingle dry clutch from Fichtel & Sachsdiffers
Hydraulics & hitch
Pump flow declared5.5 gpm · 21.0 L/min
Three-point lift at ends declared1,102 lb · 500 kg
Rear PTO speeds declared540 rpm531 rpmdiffers
Weight & dimensions
Unladen weight declared4,145 lb · 1,880 kg2,712 lb · 1,230 kg+53% 22
Maximum permissible mass declared4,850 lb · 2,200 kg
Wheelbase declared66.9 in · 1,700 mm66.0 in · 1,676 mm
Length declared119.1 in · 3,025 mm107.6 in · 2,732 mm+11% 22
Width declared62.5 in · 1,588 mm64.2 in · 1,630 mm
Height declared72.8 in · 1,850 mm62.4 in · 1,585 mm+17% 22
Ground clearance declared11.4 in · 290 mm15.6 in · 395 mm+36% DED (3)
Turning radius, braked declared8.7 ft · 2.65 m
Fuel tank declared37.0 qt · 35 L

Fahr 22 sources

Source
  • Source: Traktorenlexikon, “Fahr T 22”
  • Source: Traktorenlexikon, “Fahr F 22”

International Harvester DED (3) sources

Source
  • Source: Traktorenlexikon, “McCormick DED 3”
  • Source: Traktorenlexikon, “IHC DED 3”