Fahr D 400 B vs International Harvester W-9
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the D 400 B and the W-9 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | D 400 B | W-9 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 49.3 hp | +11% W-9 |
| Engine declared | KHD F3L 514 | INTERNATIONAL HARVESTER C-335 | differs |
| Displacement declared | 3.99 L | 5.48 L | +37% W-9 |
| Maximum torque declared | 164 lb·ft · 223 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal operated dry Fichtel & Sachs single-plate clutch | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | — | — |
| Rear PTO speeds declared | 588 rpm | 538 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,217 lb · 2,820 kg | 5,600 lb · 2,540 kg | +11% D 400 B |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 91.3 in · 2,320 mm | 83.4 in · 2,118 mm | +10% D 400 B |
| Length declared | 143.7 in · 3,650 mm | 134.3 in · 3,410 mm | +7% D 400 B |
| Width declared | 87.8 in · 2,230 mm | 75.7 in · 1,924 mm | +16% D 400 B |
| Height declared | 92.9 in · 2,360 mm | 83.0 in · 2,108 mm | +12% D 400 B |
| Ground clearance declared | 13.5 in · 343 mm | — | — |
| Turning radius, braked declared | 12.6 ft · 3.85 m | — | — |
| Fuel tank declared | 68.7 qt · 65 L | 144.0 qt · 136.3 L | +110% W-9 |
Fahr D 400 B sources
Source
- Source: Traktorenlexikon, “Fahr D 400 B”
- Source: Traktorenlexikon, “Fahr D 45 L”
International Harvester W-9 sources
Source
- Source: Traktorenlexikon, “McCormick W-9”