14 material differences
Tractor oneFahr D 400 A1955–1960No measured PTO figureTractor twoSAME Minitauro 501967–1972No measured PTO figure
Which should you choose?
Read our verdict on the D 400 A and the Minitauro 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | D 400 A | Minitauro 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 47.3 hp | +7% Minitauro 50 |
| Engine declared | KHD F3L 514 | SAME DA 029-953 L | differs |
| Displacement declared | 3.99 L | 2.55 L | +56% D 400 A |
| Maximum torque declared | 164 lb·ft · 223 N·m | 116 lb·ft · 157 N·m | +42% D 400 A |
| Transmission | |||
| Top speed declared | 12.4–16.8 mph · 20–27 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | pedal-operated dry single-plate clutch | Pedal operated dry two-stage double clutch with coil springs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.9 gpm · 18.5 L/min | 4.3 gpm · 16.1 L/min | +15% D 400 A |
| Rear PTO speeds declared | 588 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,217 lb · 2,820 kg | 3,858 lb · 1,750 kg | +61% D 400 A |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 91.3 in · 2,320 mm | 77.6 in · 1,970 mm | +18% D 400 A |
| Length declared | 143.7 in · 3,650 mm | 128.7 in · 3,270 mm | +12% D 400 A |
| Width declared | 73.4 in · 1,865 mm | 60.2–87.8 in · 1,530–2,230 mm | differs |
| Ground clearance declared | 19.7 in · 500 mm | 13.4 in · 340 mm | +47% D 400 A |
| Turning radius, braked declared | 12.6 ft · 3.85 m | 9.6 ft · 2.94 m | +31% D 400 A |
| Fuel tank declared | 68.7 qt · 65 L | 52.8 qt · 50.0 L | +30% D 400 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 400 A sources
Source
- Source: Traktorenlexikon, “Fahr D 400 A”
- Source: Traktorenlexikon, “Fahr D 45 L”
SAME Minitauro 50 sources
Source
- Source: Traktorenlexikon, “SAME Minitauro 50”