5 material differences · fewer than 12

Tractor oneFahr D 281949–1950No measured PTO figureTractor twoGüldner A 301941–1942No measured PTO figure

Which should you choose?

Read our verdict on the D 28 and the A 30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 7 fields identical or within 5%, which is not counted as material

Fahr D 28 and Güldner A 30, field by field
FieldD 28A 30Gap
Engine
Engine power, claimed claimed27.6 hp29.6 hp+7% A 30
Engine declaredGüldner 2FGüldner 2 Ediffers
Displacement declared2.60 L2.20 L+18% D 28
Maximum torque declared100 lb·ft · 135 N·m103 lb·ft · 140 N·m—
Transmission
Top speed declared12.2 mph · 19.6 km/h11.2 mph · 18 km/h+9% D 28
Clutch declaredPedal operated dry Fichtel & Sachs single disc clutchSingle-disc dry clutch from Fichtel & Sachsdiffers
Hydraulics & hitch
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared4,365 lb · 1,980 kg4,497 lb · 2,040 kg—
Wheelbase declared74.0 in · 1,880 mm70.5 in · 1,790 mm—
Length declared115.0 in · 2,920 mm115.0 in · 2,920 mm—
Width declared61.6 in · 1,565 mm64.6 in · 1,640 mm—
Ground clearance declared13.8 in · 350 mm13.8 in · 350 mm—
Fuel tank declared31.7 qt · 30 L23.2 qt · 22 L+36% D 28

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fahr D 28 sources

Source
  • Source: Traktorenlexikon, “Fahr D 28”
  • Source: Traktorenlexikon, “Güldner AF 30”

Güldner A 30 sources

Source
  • Source: Traktorenlexikon, “Güldner A 30”
  • Source: Traktorenlexikon, “Kramer K 30 D”