7 material differences · fewer than 12

Tractor oneFahr D 28 UW1948–1951No measured PTO figureTractor twoGüldner AB1958–1959No measured PTO figure

Which should you choose?

Read our verdict on the D 28 UW and the AB → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 4 fields identical or within 5%, which is not counted as material

Fahr D 28 UW and Güldner AB, field by field
FieldD 28 UWABGap
Engine
Engine power, claimed claimed27.6 hp24.5 hp+13% D 28 UW
Engine declaredGüldner 2FGüldner 2 BSdiffers
Displacement declared2.60 L1.84 L+41% D 28 UW
Maximum torque declared100 lb·ft · 135 N·m72 lb·ft · 98 N·m+38% D 28 UW
Transmission
Top speed declared12.4 mph · 20 km/h12.4 mph · 20 km/h—
Clutch declared—Pedal operated dry Fichtel & Sachs single disc clutch—
Hydraulics & hitch
Pressure declared—1,991 psi · 137 bar—
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared4,740 lb · 2,150 kg3,219 lb · 1,460 kg+47% D 28 UW
Wheelbase declared85.4 in · 2,170 mm77.4 in · 1,965 mm+10% D 28 UW
Length declared126.8 in · 3,220 mm122.6 in · 3,115 mm—
Width declared61.6 in · 1,565 mm63.0 in · 1,600 mm—
Ground clearance declared11.8 in · 300 mm14.8 in · 375 mm+25% AB
Fuel tank declared31.7 qt · 30 L37.0 qt · 35 L+17% AB

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fahr D 28 UW sources

Source
  • Source: Traktorenlexikon, “Fahr D 28 U”
  • Source: Traktorenlexikon, “Güldner AF 30”

Güldner AB sources

Source
  • Source: Traktorenlexikon, “Güldner AB”