Fahr D 25 N or Kramer KWD 250?

Which should you choose?

On performance, every comparable figure that differs favours the Fahr D 25 N: maximum permissible mass. On features, the Kramer KWD 250 is ahead on forward gears.

  • The Fahr D 25 N suits road haulage better on this data: 83% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fahr D 25 N and Kramer KWD 250, with the call on each
QuestionD 25 NKWD 250Call
Which puts more power through the PTO shaft?17.7 kW (24 hp)Traktorenlexikon, “Fahr D 25 N”17.7 kW (24 hp)Traktorenlexikon, “Kramer KWD 250”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the D 25 N and the KWD 250.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the D 25 N and the KWD 250.
Which pumps more oil for implements?16.0 L/min (4.2 gpm)Traktorenlexikon, “Kramer KWD 250”No figureNo call on hydraulic flow: no figure on record for the D 25 N.
Which lifts more on the three-point hitch?690 kg (1,521 lb)Traktorenlexikon, “Fahr D 25 N”1,100 kg (2,425 lb)Traktorenlexikon, “Kramer KWD 250”EvenNo call on three-point lift: the sources do not state where the lift was measured, so the difference is not a reliable call.
Which is heavier, for traction?1,853 kg (4,085 lb)Traktorenlexikon, “Fahr D 25 N”1,550 kg (3,417 lb)Traktorenlexikon, “Kramer KWD 250”Ahead (a fact, not an advantage)The Fahr D 25 N is 20% heavier (303 kg / 668 lb) than the Kramer KWD 250 (both unladen weight, as stated by the source).
Which may carry more ballast and load?3,300 kg (7,275 lb)Traktorenlexikon, “Fahr D 25 N”1,800 kg (3,968 lb)Traktorenlexikon, “Kramer KWD 250”AheadThe Fahr D 25 N has 83% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Kramer KWD 250 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?5 to 6Traktorenlexikon, “Fahr D 25 N”10Traktorenlexikon, “Kramer KWD 250”AheadThe Kramer KWD 250 has 67% more forward gears (4 gears) than the Fahr D 25 N (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the D 25 N and the KWD 250.
Which is faster on the road?19 km/h (11.8 mph)Traktorenlexikon, “Fahr D 25 N”19.8 km/h (12.3 mph)Traktorenlexikon, “Kramer KWD 250”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fahr D 25 N”528 rpmTraktorenlexikon, “Kramer KWD 250”No figureNo call on PTO speeds: no standard PTO speed stated for the KWD 250.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fahr D 25 N”independentTraktorenlexikon, “Kramer KWD 250”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Fahr D 25 N”2WDTraktorenlexikon, “Kramer KWD 250”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?19531958–1959Ahead (a fact, not an advantage)The Kramer KWD 250 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fahr D 25 N is 20% heavier (303 kg / 668 lb) than the Kramer KWD 250 (both unladen weight, as stated by the source).
  • The Fahr D 25 N has 83% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Kramer KWD 250 (both maximum permissible mass, as stated by the source).
  • The Kramer KWD 250 has 67% more forward gears (4 gears) than the Fahr D 25 N (both forward gears, as stated by the source).
  • The Kramer KWD 250 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • No call on three-point lift: the sources do not state where the lift was measured, so the difference is not a reliable call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO speeds.

← Every figure for both machines, side by side, with sources