10 material differences · fewer than 12
Tractor oneFahr D 25 H1951–1953No measured PTO figureTractor twoRenault Super 31964–1965No measured PTO figure
Which should you choose?
Read our verdict on the D 25 H and the Super 3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D 25 H | Super 3 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.7 hp | 24.7 hp | — |
| Engine declared | KHD F2M 414 | MWM AKD 112 Z | differs |
| Displacement declared | 2.20 L | 1.81 L | +21% D 25 H |
| Maximum torque declared | 88 lb·ft · 120 N·m | — | — |
| Transmission | |||
| Top speed declared | 11.9 mph · 19.2 km/h | 15.5 mph · 25 km/h | +30% Super 3 |
| Clutch declared | — | Dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.0 gpm · 15.0 L/min | — |
| Pressure declared | 3,129 psi · 216 bar | — | — |
| Rear PTO speeds declared | 540 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,145 lb · 1,880 kg | 3,263 lb · 1,480 kg | +27% D 25 H |
| Maximum permissible mass declared | 4,960 lb · 2,250 kg | — | — |
| Wheelbase declared | 72.4 in · 1,840 mm | 67.7 in · 1,720 mm | +7% D 25 H |
| Length declared | 114.6 in · 2,910 mm | 118.1 in · 3,000 mm | — |
| Width declared | 62.5 in · 1,588 mm | 61.8–83.1 in · 1,570–2,110 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 14.2 in · 360 mm | +6% D 25 H |
| Turning radius, braked declared | 11.0 ft · 3.35 m | 9.3 ft · 2.83 m | +18% D 25 H |
| Fuel tank declared | 54.9 qt · 52 L | 42.3 qt · 40.0 L | +30% D 25 H |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 25 H sources
- Source: Traktorenlexikon, “Fahr D 25 H”
- Source: Traktorenlexikon, “Fahr D 22”
Renault Super 3 sources
- Source: Traktorenlexikon, “Renault Super 3/R 7052”
- Source: Traktorenlexikon, “Fendt Farmer 1 Z”