10 material differences · fewer than 12
Tractor oneFahr D 17 NA1953–1955No measured PTO figureTractor twoInternational Harvester Farmall A/AV (International Harvester)1947–1954No measured PTO figure
Which should you choose?
Read our verdict on the D 17 NA and the Farmall A/AV → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | D 17 NA | Farmall A/AV | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 16.8 hp | 19 hp | +12% Farmall A/AV |
| Engine declared | Güldner 2 DN | INTERNATIONAL HARVESTER C-113 | differs |
| Displacement declared | 1.30 L | 1.85 L | +42% Farmall A/AV |
| Maximum torque declared | 51 lb·ft · 69 N·m | — | — |
| Transmission | |||
| Top speed declared | 11.7 mph · 18.8 km/h | 12.4 mph · 20 km/h | +6% Farmall A/AV |
| Clutch declared | — | Pedal-operated dry ROCKFORD single-plate clutch, type 9 inches | — |
| Hydraulics & hitch | |||
| Pressure declared | 3,129 psi · 216 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 541 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,712 lb · 1,230 kg | 2,385 lb · 1,082 kg | +14% D 17 NA |
| Maximum permissible mass declared | 4,189 lb · 1,900 kg | — | — |
| Wheelbase declared | 64.6 in · 1,640 mm | 71.1 in · 1,807 mm | +10% Farmall A/AV |
| Length declared | 103.1 in · 2,620 mm | 106.9 in · 2,715 mm | — |
| Width declared | 61.5 in · 1,562 mm | 55.9–78.0 in · 1,419–1,981 mm | differs |
| Ground clearance declared | 15.9 in · 403 mm | 21.9 in · 556 mm | +38% Farmall A/AV |
| Turning radius, braked declared | 8.0 ft · 2.45 m | 9.0 ft · 2.74 m | +12% Farmall A/AV |
| Fuel tank declared | 26.4 qt · 25 L | 40.0 qt · 37.9 L | +52% Farmall A/AV |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fahr D 17 NA sources
- Source: Traktorenlexikon, “Fahr D 17 NA”
- Source: Traktorenlexikon, “MAN AS 718 A”
International Harvester Farmall A/AV (International Harvester) sources
- Source: Traktorenlexikon, “McCormick Farmall Super-A”
- Source: Traktorenlexikon, “McCormick Farmall-A”
- Source: Traktorenlexikon, “IHC Farmall Super-A”
- Source: Traktorenlexikon, “Farmall Farmall Super-A”