9 material differences · fewer than 12
Tractor oneEicher EM 300/2 Königstiger1963–1968No measured PTO figureTractor twoGüldner G 40 (S)1963–1969No measured PTO figure
Which should you choose?
Read our verdict on the EM 300/2 Königstiger and the G 40 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | EM 300/2 Königstiger | G 40 (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.3 hp | 37.3 hp | — |
| Engine declared | Eicher EDK 3 | Güldner 3 L 79 | differs |
| Displacement declared | 2.94 L | 2.36 L | +25% EM 300/2 Königstiger |
| Maximum torque declared | 122 lb·ft · 166 N·m | 95 lb·ft · 128 N·m | +30% EM 300/2 Königstiger |
| Transmission | |||
| Top speed declared | 12.3 mph · 19.8 km/h | 12.4–18.6 mph · 20–30 km/h | differs |
| Clutch declared | double clutch with continuously adjustable pedal | Pedal operated dry double clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Rear PTO speeds declared | 558/1116 rpm | 540/1150 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,079–4,112 lb · 1,850–1,865 kg | 5,170 lb · 2,345 kg | differs |
| Maximum permissible mass declared | 5,512 lb · 2,500 kg | — | — |
| Wheelbase declared | 83.4 in · 2,119 mm | 76.9 in · 1,954 mm | +8% EM 300/2 Königstiger |
| Length declared | 127.6 in · 3,240 mm | 128.2 in · 3,257 mm | — |
| Width declared | 61.0 in · 1,550 mm | 61.9 in · 1,572 mm | — |
| Ground clearance declared | 15.2 in · 386 mm | 15.2 in · 387 mm | — |
| Turning radius, braked declared | 11.0 ft · 3.35 m | — | — |
| Fuel tank declared | 40.2 qt · 38 L | 52.8 qt · 50 L | +32% G 40 (S) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher EM 300/2 Königstiger sources
- Source: Traktorenlexikon, “Eicher EM 300/2 Königstiger”
Güldner G 40 (S) sources
- Source: Traktorenlexikon, “Güldner G 40”
- Source: Traktorenlexikon, “Güldner G 40 Toledo”