6 material differences · fewer than 12

Tractor oneEicher 680 PAB1986–1991No measured PTO figureTractor twoLandini R-8860 (DT) TL-23 N/M (TL-23 DT/M)1988–2000No measured PTO figure

Which should you choose?

Read our verdict on the 680 PAB and the R-8860 (DT) TL-23 N/M (TL-23 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 4 fields identical or within 5%, which is not counted as material

Eicher 680 PAB and Landini R-8860 (DT) TL-23 N/M (TL-23 DT/M), field by field
Field680 PABR-8860 (DT) TL-23 N/M (TL-23 DT/M)Gap
Engine
Engine power, claimed claimed79 hp78.9 hp—
Engine declared—Perkins LF 4.248—
Displacement declared—4.06 L—
Maximum torque declared—215 lb·ft · 291 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declared—Dry and air-cooled OMG double clutch—
Hydraulics & hitch
Pump flow declared11.6 gpm · 44 L/min9.3 gpm · 35.3 L/min+25% 680 PAB
Pressure declared2,538 psi · 175 bar2,756 psi · 190 bar+9% R-8860 (DT) TL-23 N/M (TL-23 DT/M)
Rear PTO speeds declared540 rpm / 750 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,228 lb · 2,825 kg6,437 lb · 2,920 kg—
Maximum permissible mass declared8,818 lb · 4,000 kg——
Wheelbase declared89.6 in · 2,275 mm92.2 in · 2,341 mm—
Length declared131.3 in · 3,335 mm150.0 in · 3,810 mm+14% R-8860 (DT) TL-23 N/M (TL-23 DT/M)
Width declared52.8 in · 1,341 mm77.8 in · 1,975 mm+47% R-8860 (DT) TL-23 N/M (TL-23 DT/M)
Ground clearance declared15.4 in · 390 mm21.3 in · 540 mm+38% R-8860 (DT) TL-23 N/M (TL-23 DT/M)
Turning radius, braked declared—13.5 ft · 4.11 m—
Fuel tank declared—90.9 qt · 86.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Eicher 680 PAB sources

Source
  • Source: Traktorenlexikon, “Eicher 680 PAB”

Landini R-8860 (DT) TL-23 N/M (TL-23 DT/M) sources

Source
  • Source: Traktorenlexikon, “Landini 8860”