6 material differences · fewer than 12
Tractor oneEicher 680 PAB1986–1991No measured PTO figureTractor twoLamborghini 774-80 DT1986–1990No measured PTO figure
Which should you choose?
Read our verdict on the 680 PAB and the 774-80 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 680 PAB | 774-80 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79 hp | 78.9 hp | — |
| Engine declared | — | SAME 1000.4 W 1 | — |
| Displacement declared | — | 4.00 L | — |
| Maximum torque declared | — | 193 lb·ft · 261 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated dry Lamborghini single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.6 gpm · 44 L/min | 9.5 gpm · 35.8 L/min | +23% 680 PAB |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,228 lb · 2,825 kg | 5,997 lb · 2,720 kg | — |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 89.6 in · 2,275 mm | 92.9 in · 2,360 mm | — |
| Length declared | 131.3 in · 3,335 mm | 142.1 in · 3,610 mm | +8% 774-80 DT |
| Width declared | 52.8 in · 1,341 mm | 82.3–90.2 in · 2,090–2,290 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 19.3 in · 490 mm | +26% 774-80 DT |
| Turning radius, braked declared | — | 9.6 ft · 2.94 m | — |
| Fuel tank declared | — | 89.8 qt · 85.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 680 PAB sources
- Source: Traktorenlexikon, “Eicher 680 PAB”
Lamborghini 774-80 DT sources
- Source: Traktorenlexikon, “Lamborghini 774-80 DT”
- Source: Traktorenlexikon, “Lamborghini 774-80 DT A Grand Prix”