Eicher 635 K or UTB U-360?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 635 K has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-360 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Eicher 635 K suits loader and hydraulic implement work better on this data: 102% (22.2 L/min / 5.9 gpm) more hydraulic flow.
- The Eicher 635 K suits road haulage better on this data: 10% (2.4 km/h / 1.5 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 635 K | U-360 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 26 kW (35 hp)Traktorenlexikon, “Eicher 635 K” | 25.7 kW (34.5 hp)Traktorenlexikon, “UTB U 360” | Not comparableNot comparable on power at the PTO shaft: the 635 K has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-360 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 635 K and the U-360. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 635 K and the U-360. |
| Which pumps more oil for implements? | 44.0 L/min (11.6 gpm)Traktorenlexikon, “Eicher 635 K” | 21.8 L/min (5.8 gpm)Traktorenlexikon, “UTB U 360” | AheadThe Eicher 635 K has 102% more hydraulic flow (22.2 L/min / 5.9 gpm) than the UTB U-360 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,615 kg (3,560 lb)Traktorenlexikon, “Eicher 635 K” | 1,200 kg (2,646 lb)Traktorenlexikon, “UTB U 360” | Not comparableNot comparable on three-point lift: the 635 K: lift at an unstated point, as stated by the source (Traktorenlexikon, “Eicher 635 K”); the U-360: lift at the hitch ends, as stated by the source (Traktorenlexikon, “UTB U 360”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 1,510 kg (3,329 lb)Traktorenlexikon, “Eicher 635 K” | 1,723 kg (3,799 lb)Traktorenlexikon, “UTB U 360” | Ahead (a fact, not an advantage)The UTB U-360 is 14% heavier (213 kg / 470 lb) than the Eicher 635 K (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 635 K and the U-360. |
| Which has the wider choice of gears? | 11Traktorenlexikon, “Eicher 635 K” | 6 to 8Traktorenlexikon, “UTB U 360” | AheadThe Eicher 635 K has 38% more forward gears (3 gears) than the UTB U-360 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 635 K and the U-360. |
| Which is faster on the road? | 25.4 km/h (15.8 mph)Traktorenlexikon, “Eicher 635 K” | 23 km/h (14.3 mph)Traktorenlexikon, “UTB U 360” | AheadThe Eicher 635 K has 10% more top speed (2.4 km/h / 1.5 mph) than the UTB U-360 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Eicher 635 K” | 540 rpmTraktorenlexikon, “UTB U 360” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 635 K and the U-360. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Eicher 635 K” | 2WDTraktorenlexikon, “UTB U 360” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1986–1993 | 1977–1991 | Ahead (a fact, not an advantage)The Eicher 635 K is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Eicher 635 K has 102% more hydraulic flow (22.2 L/min / 5.9 gpm) than the UTB U-360 (both pump flow, as stated by the source).
- The UTB U-360 is 14% heavier (213 kg / 470 lb) than the Eicher 635 K (both unladen weight, as stated by the source).
- The Eicher 635 K has 38% more forward gears (3 gears) than the UTB U-360 (both forward gears, as stated by the source).
- The Eicher 635 K has 10% more top speed (2.4 km/h / 1.5 mph) than the UTB U-360 (both top speed forward, as stated by the source).
- The Eicher 635 K is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on drive: all two-wheel drive.
- Not comparable on power at the PTO shaft: the 635 K has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-360 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 635 K: lift at an unstated point, as stated by the source (Traktorenlexikon, “Eicher 635 K”); the U-360: lift at the hitch ends, as stated by the source (Traktorenlexikon, “UTB U 360”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources