8 material differences · fewer than 12
Tractor oneEicher 40381978–1982No measured PTO figureTractor twoMassey Ferguson MF 253 (A)1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the 4038 and the MF 253 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4038 | MF 253 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.3 hp | 48.4 hp | +30% MF 253 (A) |
| Engine declared | Perkins AD 3.152 | Perkins AT 3.152-4 | differs |
| Displacement declared | 2.50 L | 2.50 L | — |
| Maximum torque declared | 114 lb·ft · 155 N·m | 142 lb·ft · 192 N·m | +24% MF 253 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% MF 253 (A) |
| Clutch declared | Dual dry clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.5 gpm · 13.3 L/min | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,784 lb · 2,170 kg | 4,786 lb · 2,171 kg | — |
| Maximum permissible mass declared | 6,614 lb · 3,000 kg | — | — |
| Wheelbase declared | 83.2 in · 2,113 mm | 81.9 in · 2,080 mm | — |
| Length declared | 137.2 in · 3,485 mm | 125.6 in · 3,190 mm | +9% 4038 |
| Width declared | 63.4 in · 1,610 mm | 72.4 in · 1,838 mm | +14% MF 253 (A) |
| Ground clearance declared | 14.6 in · 370 mm | 8.0 in · 203 mm | +82% 4038 |
| Turning radius, braked declared | 11.4 ft · 3.48 m | — | — |
| Fuel tank declared | 89.8 qt · 85 L | 50.7 qt · 48 L | +77% 4038 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 4038 sources
- Source: Traktorenlexikon, “Eicher 4038”
- Source: Traktorenlexikon, “Massey Ferguson MF 148”
Massey Ferguson MF 253 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 253”