6 material differences · fewer than 12
Tractor oneEicher 37081970–1971No measured PTO figureTractor twoUTB 302 Dtce-IF1980–1991No measured PTO figure
Which should you choose?
Read our verdict on the 3708 and the 302 Dtce-IF → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 3708 | 302 Dtce-IF | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 29.6 hp | 29.6 hp | — |
| Engine declared | — | UTB D-111.057 | — |
| Displacement declared | — | 1.80 L | — |
| Maximum torque declared | — | 82 lb·ft · 111 N·m | — |
| Transmission | |||
| Top speed declared | 15.3 mph · 24.6 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | double clutch by Fichtel & Sachs type DO 250/225 | Pedal-operated, dry two-stage double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.1 gpm · 15.4 L/min | 6.6 gpm · 25.0 L/min | +62% 302 Dtce-IF |
| Pressure declared | 2,489 psi · 172 bar | — | — |
| Rear PTO speeds declared | 602/1143 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,527 lb · 1,600 kg | 6,118 lb · 2,775 kg | +73% 302 Dtce-IF |
| Maximum permissible mass declared | 5,512 lb · 2,500 kg | — | — |
| Wheelbase declared | 72.4–74.0 in · 1,840–1,880 mm | 70.9 in · 1,800 mm | — |
| Length declared | 109.1–110.2 in · 2,770–2,800 mm | 110.4 in · 2,805 mm | — |
| Width declared | 36.2–46.1 in · 920–1,170 mm | 59.4 in · 1,510 mm | differs |
| Ground clearance declared | 8.7 in · 220 mm | — | — |
| Fuel tank declared | 37.0 qt · 35 L | 57.1 qt · 54.0 L | +54% 302 Dtce-IF |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3708 sources
- Source: Traktorenlexikon, “Eicher 3708”
UTB 302 Dtce-IF sources
- Source: Traktorenlexikon, “UTB U 302 DTCE IF”