Eicher 3554 Büffel 74 A or International Harvester 664?

Which should you choose?

On performance, every comparable figure that differs favours the International Harvester 664: hydraulic flow. It is also ahead on top speed and PTO speeds. On features, the Eicher 3554 Büffel 74A is ahead on drive.

  • The International Harvester 664 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The International Harvester 664 suits loader and hydraulic implement work better on this data: 139% (26.4 L/min / 7.0 gpm) more hydraulic flow.
  • The Eicher 3554 Büffel 74A suits heavy draft work (ploughing, cultivating) better on this data: 28% (752 kg / 1,658 lb) heavier and four-wheel drive.
  • The International Harvester 664 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Eicher 3554 Büffel 74 A and International Harvester 664, with the call on each
Question3554 Büffel 74 A664Call
Which puts more power through the PTO shaft?44.9 kW (60 hp)Traktorenlexikon, “Eicher 3554 Büffel 74 A”45.4 kW (60.9 hp)Traktorenlexikon, “IHC 664”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 3554 Büffel 74 A and the 664.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 3554 Büffel 74 A and the 664.
Which pumps more oil for implements?19 L/min (5.0 gpm)Traktorenlexikon, “Eicher 3554 Büffel 74 A”45.4 L/min (12.0 gpm)Traktorenlexikon, “IHC 664”AheadThe International Harvester 664 has 139% more hydraulic flow (26.4 L/min / 7.0 gpm) than the Eicher 3554 Büffel 74A (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?——No figureNo call on three-point lift: no figure on record for the 3554 Büffel 74 A and the 664.
Which is heavier, for traction?3,450 kg (7,606 lb)Traktorenlexikon, “Eicher 3554 Büffel 74 A”2,698 kg (5,948 lb)Traktorenlexikon, “IHC 664”Ahead (a fact, not an advantage)The Eicher 3554 Büffel 74A is 28% heavier (752 kg / 1,658 lb) than the International Harvester 664 (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 3554 Büffel 74 A and the 664.
Which has the wider choice of gears?12Traktorenlexikon, “Eicher 3554 Büffel 74 A”5 to 10Traktorenlexikon, “IHC 664”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 3554 Büffel 74 A and the 664.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Eicher 3554 Büffel 74 A”30 km/h (18.6 mph)Traktorenlexikon, “IHC 664”AheadThe International Harvester 664 has 20% more top speed (5.0 km/h / 3.1 mph) than the Eicher 3554 Büffel 74A (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Eicher 3554 Büffel 74 A”540/1000 rpmTraktorenlexikon, “IHC 664”AheadThe International Harvester 664 offers 1000 rpm at the PTO, which the Eicher 3554 Büffel 74A does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Eicher 3554 Büffel 74 A”—No figureNo call on PTO independence: not stated for the 664.
Which drives on both axles?4WDTraktorenlexikon, “Eicher 3554 Büffel 74 A”2WDTraktorenlexikon, “IHC 664”AheadThe Eicher 3554 Büffel 74A is available with four-wheel drive; the International Harvester 664 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1974–19781972–1973EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 664 has 139% more hydraulic flow (26.4 L/min / 7.0 gpm) than the Eicher 3554 Büffel 74A (both pump flow, as stated by the source).
  • The Eicher 3554 Büffel 74A is 28% heavier (752 kg / 1,658 lb) than the International Harvester 664 (both unladen weight, as stated by the source).
  • The International Harvester 664 has 20% more top speed (5.0 km/h / 3.1 mph) than the Eicher 3554 Büffel 74A (both top speed forward, as stated by the source).
  • The International Harvester 664 offers 1000 rpm at the PTO, which the Eicher 3554 Büffel 74A does not (as stated by the sources).
  • The Eicher 3554 Büffel 74A is available with four-wheel drive; the International Harvester 664 is two-wheel drive (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources