Eicher Mammut 3422 A or Massey Ferguson MF 275 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the Eicher Mammut 3422 A: hydraulic flow and three-point lift. It is also ahead on forward gears.
- The Eicher Mammut 3422 A suits loader and hydraulic implement work better on this data: 51% (13.5 L/min / 3.6 gpm) more hydraulic flow and 52% (1,100 kg / 2,425 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Mammut 3422 A | MF 275 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 42.3 kW (56.7 hp)Traktorenlexikon, “Eicher 3422 Mammut A” | 42.4 kW (56.9 hp)Traktorenlexikon, “Massey Ferguson MF 275” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Mammut 3422 A and the MF 275 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Mammut 3422 A and the MF 275 (A). |
| Which pumps more oil for implements? | 40.0 L/min (10.6 gpm)Traktorenlexikon, “Eicher 3422 Mammut A” | 26.5 L/min (7.0 gpm)Traktorenlexikon, “Massey Ferguson MF 275” | AheadThe Eicher Mammut 3422 A has 51% more hydraulic flow (13.5 L/min / 3.6 gpm) than the Massey Ferguson MF 275 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,200 kg (7,055 lb)Traktorenlexikon, “Eicher 3422 Mammut A” | 2,100 kg (4,630 lb)Traktorenlexikon, “Massey Ferguson MF 275” | AheadThe Eicher Mammut 3422 A has 52% more lift (1,100 kg / 2,425 lb) than the Massey Ferguson MF 275 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,140 kg (6,923 lb)Traktorenlexikon, “Eicher 3422 Mammut A” | 2,850 kg (6,283 lb)Traktorenlexikon, “Massey Ferguson MF 275” | Ahead (a fact, not an advantage)The Eicher Mammut 3422 A is 10% heavier (290 kg / 639 lb) than the Massey Ferguson MF 275 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 5,000 kg (11,023 lb)Traktorenlexikon, “Eicher 3422 Mammut A” | — | No figureNo call on maximum permissible mass: no figure on record for the MF 275 (A). |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Eicher 3422 Mammut A” | 8 to 12Traktorenlexikon, “Massey Ferguson MF 275” | AheadThe Eicher Mammut 3422 A has 33% more forward gears (4 gears) than the Massey Ferguson MF 275 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “Eicher 3422 Mammut A” | — | No figureNo call on a creeper range: not stated for the MF 275 (A). |
| Which is faster on the road? | 27 km/h (16.8 mph)Traktorenlexikon, “Eicher 3422 Mammut A” | 25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 275” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 612/1023 rpmTraktorenlexikon, “Eicher 3422 Mammut A” | 540 rpmTraktorenlexikon, “Massey Ferguson MF 275” | No figureNo call on PTO speeds: no standard PTO speed stated for the Mammut 3422 A. |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Eicher 3422 Mammut A” | independentTraktorenlexikon, “Massey Ferguson MF 275” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Eicher 3422 Mammut A” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 275” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1970–1973 | 1975–1983 | Ahead (a fact, not an advantage)The Massey Ferguson MF 275 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Eicher Mammut 3422 A has 51% more hydraulic flow (13.5 L/min / 3.6 gpm) than the Massey Ferguson MF 275 (A) (both pump flow, as stated by the source).
- The Eicher Mammut 3422 A has 52% more lift (1,100 kg / 2,425 lb) than the Massey Ferguson MF 275 (A) (both lift at the hitch ends, as stated by the source).
- The Eicher Mammut 3422 A is 10% heavier (290 kg / 639 lb) than the Massey Ferguson MF 275 (A) (both unladen weight, as stated by the source).
- The Eicher Mammut 3422 A has 33% more forward gears (4 gears) than the Massey Ferguson MF 275 (A) (both forward gears, as stated by the source).
- The Massey Ferguson MF 275 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO speeds.
← Every figure for both machines, side by side, with sources