Eicher Mammut 3422 A or J.I. Case 741?
Which should you choose?
On performance, every comparable figure that differs favours the J.I. Case 741: hydraulic flow. It is also ahead on top speed. On features, the Eicher Mammut 3422 A is ahead on forward gears and drive.
- The J.I. Case 741 suits loader and hydraulic implement work better on this data: 48% (19.0 L/min / 5.0 gpm) more hydraulic flow.
- The Eicher Mammut 3422 A suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
- The J.I. Case 741 suits road haulage better on this data: 11% (3.0 km/h / 1.9 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Mammut 3422 A | 741 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 42.3 kW (56.7 hp)Traktorenlexikon, “Eicher 3422 Mammut A” | 42.6 kW (57.1 hp)Traktorenlexikon, “Case 741” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Mammut 3422 A and the 741. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Mammut 3422 A and the 741. |
| Which pumps more oil for implements? | 40.0 L/min (10.6 gpm)Traktorenlexikon, “Eicher 3422 Mammut A” | 59.0 L/min (15.6 gpm)Traktorenlexikon, “Case 741” | AheadThe J.I. Case 741 has 48% more hydraulic flow (19.0 L/min / 5.0 gpm) than the Eicher Mammut 3422 A (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,200 kg (7,055 lb)Traktorenlexikon, “Eicher 3422 Mammut A” | — | No figureNo call on three-point lift: no figure on record for the 741. |
| Which is heavier, for traction? | 3,140 kg (6,923 lb)Traktorenlexikon, “Eicher 3422 Mammut A” | 3,137 kg (6,916 lb)Traktorenlexikon, “Case 741” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 5,000 kg (11,023 lb)Traktorenlexikon, “Eicher 3422 Mammut A” | — | No figureNo call on maximum permissible mass: no figure on record for the 741. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Eicher 3422 Mammut A” | 8Traktorenlexikon, “Case 741” | AheadThe Eicher Mammut 3422 A has 100% more forward gears (8 gears) than the J.I. Case 741 (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “Eicher 3422 Mammut A” | — | No figureNo call on a creeper range: not stated for the 741. |
| Which is faster on the road? | 27 km/h (16.8 mph)Traktorenlexikon, “Eicher 3422 Mammut A” | 30 km/h (18.6 mph)Traktorenlexikon, “Case 741” | AheadThe J.I. Case 741 has 11% more top speed (3.0 km/h / 1.9 mph) than the Eicher Mammut 3422 A (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 612/1023 rpmTraktorenlexikon, “Eicher 3422 Mammut A” | 540/1000 rpmTraktorenlexikon, “Case 741” | No figureNo call on PTO speeds: no standard PTO speed stated for the Mammut 3422 A. |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Eicher 3422 Mammut A” | independentTraktorenlexikon, “Case 741” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Eicher 3422 Mammut A” | 2WDTraktorenlexikon, “Case 741” | AheadThe Eicher Mammut 3422 A is available with four-wheel drive; the J.I. Case 741 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1970–1973 | 1960–1969 | Ahead (a fact, not an advantage)The Eicher Mammut 3422 A is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The J.I. Case 741 has 48% more hydraulic flow (19.0 L/min / 5.0 gpm) than the Eicher Mammut 3422 A (both pump flow, as stated by the source).
- The Eicher Mammut 3422 A has 100% more forward gears (8 gears) than the J.I. Case 741 (both forward gears, as stated by the source).
- The J.I. Case 741 has 11% more top speed (3.0 km/h / 1.9 mph) than the Eicher Mammut 3422 A (both top speed forward, as stated by the source).
- The Eicher Mammut 3422 A is available with four-wheel drive; the J.I. Case 741 is two-wheel drive (as stated by the sources).
- The Eicher Mammut 3422 A is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO speeds.
← Every figure for both machines, side by side, with sources