Eicher Mammut 3354 or Massey Ferguson MF 575 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the Massey Ferguson MF 575 (A): hydraulic flow and three-point lift.
- The Massey Ferguson MF 575 (A) suits loader and hydraulic implement work better on this data: 229% (43.5 L/min / 11.5 gpm) more hydraulic flow and 17% (300 kg / 661 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Mammut 3354 | MF 575 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 40.5 kW (54 hp)Traktorenlexikon, “Eicher 3354 Mammut 74 A” | 40.5 kW (54.2 hp)Traktorenlexikon, “Massey Ferguson MF 575 & 575A” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Mammut 3354 and the MF 575 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Mammut 3354 and the MF 575 (A). |
| Which pumps more oil for implements? | 19.0 L/min (5.0 gpm)Traktorenlexikon, “Eicher 3354 Mammut 74 A” | 62.5 L/min (16.5 gpm)Traktorenlexikon, “Massey Ferguson MF 575 & 575A” | AheadThe Massey Ferguson MF 575 (A) has 229% more hydraulic flow (43.5 L/min / 11.5 gpm) than the Eicher Mammut 3354 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,800 kg (3,968 lb)Traktorenlexikon, “Eicher 3354 Mammut 74 A” | 2,100 kg (4,630 lb)Traktorenlexikon, “Massey Ferguson MF 575 & 575A” | AheadThe Massey Ferguson MF 575 (A) has 17% more lift (300 kg / 661 lb) than the Eicher Mammut 3354 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,650 kg (5,842 lb)Traktorenlexikon, “Eicher 3354 Mammut 74 A” | 3,140 kg (6,923 lb)Traktorenlexikon, “Massey Ferguson MF 575 & 575A” | Ahead (a fact, not an advantage)The Massey Ferguson MF 575 (A) is 18% heavier (490 kg / 1,080 lb) than the Eicher Mammut 3354 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Mammut 3354 and the MF 575 (A). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Eicher 3354 Mammut 74 A” | 8 to 12Traktorenlexikon, “Massey Ferguson MF 575 & 575A” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Mammut 3354 and the MF 575 (A). |
| Which is faster on the road? | 24 km/h (14.9 mph)Traktorenlexikon, “Eicher 3354 Mammut 74 A” | 25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 575 & 575A” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Eicher 3354 Mammut 74 A” | 540/1686 rpmTraktorenlexikon, “Massey Ferguson MF 575 & 575A” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Eicher 3354 Mammut 74 A” | independentTraktorenlexikon, “Massey Ferguson MF 575 & 575A” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Eicher 3354 Mammut 74 A” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 575 & 575A” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1974–1978 | 1976–1983 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 575 (A) has 229% more hydraulic flow (43.5 L/min / 11.5 gpm) than the Eicher Mammut 3354 (both pump flow, as stated by the source).
- The Massey Ferguson MF 575 (A) has 17% more lift (300 kg / 661 lb) than the Eicher Mammut 3354 (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson MF 575 (A) is 18% heavier (490 kg / 1,080 lb) than the Eicher Mammut 3354 (both unladen weight, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources