8 material differences · fewer than 12
Tractor oneEicher 3253 Königstiger 741973–1978No measured PTO figureTractor twoUTB U 4451974–1981No measured PTO figure
Which should you choose?
Read our verdict on the 3253 Königstiger 74 and the U 445 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 3253 Königstiger 74 | U 445 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44 hp | 42.4 hp | — |
| Engine declared | — | UTB D-115 | — |
| Displacement declared | — | 2.34 L | — |
| Maximum torque declared | 127 lb·ft · 172 N·m | 103 lb·ft · 140 N·m | +23% 3253 Königstiger 74 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal-operated two-stage dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.0 gpm · 19 L/min | 5.8 gpm · 21.8 L/min | +15% U 445 |
| Pressure declared | 2,987 psi · 206 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,486 lb · 2,035 kg | 4,057 lb · 1,840 kg | +11% 3253 Königstiger 74 |
| Wheelbase declared | 81.3 in · 2,065 mm | 75.6 in · 1,920 mm | +8% 3253 Königstiger 74 |
| Length declared | 125.8 in · 3,195 mm | 115.0 in · 2,920 mm | +9% 3253 Königstiger 74 |
| Width declared | 66.5 in · 1,690 mm | 59.6–87.2 in · 1,515–2,215 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 18.3 in · 465 mm | +22% U 445 |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 9.9 ft · 3.02 m | — |
| Fuel tank declared | 50.7 qt · 48 L | 57.1 qt · 54.0 L | +13% U 445 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3253 Königstiger 74 sources
- Source: Traktorenlexikon, “Eicher 3253 Königstiger 74”
UTB U 445 sources
- Source: Traktorenlexikon, “UTB U 445”