9 material differences · fewer than 12
Tractor oneEicher 3253 Königstiger 741973–1978No measured PTO figureTractor twoUTB 445 DTC1974–1981No measured PTO figure
Which should you choose?
Read our verdict on the 3253 Königstiger 74 and the 445 DTC → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3253 Königstiger 74 | 445 DTC | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44 hp | 42.4 hp | — |
| Engine declared | — | UTB D-115 | — |
| Displacement declared | — | 2.34 L | — |
| Maximum torque declared | 127 lb·ft · 172 N·m | 103 lb·ft · 140 N·m | +23% 3253 Königstiger 74 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | pedal-operated dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.0 gpm · 19 L/min | 5.8 gpm · 21.8 L/min | +15% 445 DTC |
| Pressure declared | 2,987 psi · 206 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,486 lb · 2,035 kg | 4,850 lb · 2,200 kg | +8% 445 DTC |
| Wheelbase declared | 81.3 in · 2,065 mm | 72.8 in · 1,850 mm | +12% 3253 Königstiger 74 |
| Length declared | 125.8 in · 3,195 mm | 115.0 in · 2,920 mm | +9% 3253 Königstiger 74 |
| Width declared | 66.5 in · 1,690 mm | 60.8–88.4 in · 1,545–2,245 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 13.4 in · 340 mm | +12% 3253 Königstiger 74 |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 14.8 ft · 4.50 m | +45% 445 DTC |
| Fuel tank declared | 50.7 qt · 48 L | 57.1 qt · 54.0 L | +13% 445 DTC |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3253 Königstiger 74 sources
- Source: Traktorenlexikon, “Eicher 3253 Königstiger 74”
UTB 445 DTC sources
- Source: Traktorenlexikon, “UTB U 445 DT”
- Source: Traktorenlexikon, “UTB U 445”