Eicher 3133 or Steyr 8160 a?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Eicher 3133 is ahead on PTO speeds.

  • The Eicher 3133 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Eicher 3133 and Steyr 8160 a, with the call on each
Question31338160 aCall
Which puts more power through the PTO shaft?94 kW (126 hp)Traktorenlexikon, “Eicher 3133”93.1 kW (124.9 hp)Traktorenlexikon, “Steyr 8160”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 3133 and the 8160 a.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 3133 and the 8160 a.
Which pumps more oil for implements?42.0 L/min (11.1 gpm)Traktorenlexikon, “Eicher 3133”41.0 L/min (10.8 gpm)Traktorenlexikon, “Steyr 8160”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?4,181 kg (9,217 lb)Traktorenlexikon, “Eicher 3133”4,520 kg (9,965 lb)Traktorenlexikon, “Steyr 8160”Not comparableNot comparable on three-point lift: the 3133: lift at an unstated point, as stated by the source (Traktorenlexikon, “Eicher 3133”); the 8160 a: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Steyr 8160”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,550 kg (12,236 lb)Traktorenlexikon, “Eicher 3133”5,590 kg (12,324 lb)Traktorenlexikon, “Steyr 8160”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Eicher 3133”8,000 kg (17,637 lb)Traktorenlexikon, “Steyr 8160”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12Traktorenlexikon, “Eicher 3133”12 to 36Traktorenlexikon, “Steyr 8160”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Eicher 3133”—No figureNo call on a creeper range: not stated for the 8160 a.
Which is faster on the road?31.5 km/h (19.6 mph)Traktorenlexikon, “Eicher 3133”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Steyr 8160”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Eicher 3133”1000 rpmTraktorenlexikon, “Steyr 8160”AheadThe Eicher 3133 offers 540 rpm at the PTO, which the Steyr 8160a does not (as stated by the sources).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Steyr 8160”No figureNo call on PTO independence: not stated for the 3133.
Which drives on both axles?4WDTraktorenlexikon, “Eicher 3133”4WDTraktorenlexikon, “Steyr 8160”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1977–19821976–1980EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Eicher 3133 offers 540 rpm at the PTO, which the Steyr 8160a does not (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on three-point lift: the 3133: lift at an unstated point, as stated by the source (Traktorenlexikon, “Eicher 3133”); the 8160 a: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Steyr 8160”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources