6 material differences · fewer than 12
Tractor oneEicher 31081982–1990No measured PTO figureTractor twoLandini 11800 (DT)1987–2000No measured PTO figure
Which should you choose?
Read our verdict on the 3108 and the 11800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 3108 | 11800 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 106 hp | 105.7 hp | — |
| Engine declared | Eicher EDL 6 - 4 | PERKINS TW 6.354-4 | differs |
| Displacement declared | 5.89 L | 5.80 L | — |
| Maximum torque declared | — | 258 lb·ft · 350 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Single-plate dry clutch with centrifugal cooling | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.4 gpm · 50.6 L/min | 13.5 gpm · 51.2 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,905 lb · 5,400 kg | 9,678 lb · 4,390 kg | +23% 3108 |
| Maximum permissible mass declared | — | 15,432 lb · 7,000 kg | — |
| Wheelbase declared | 107.5 in · 2,730 mm | 106.1 in · 2,696 mm | — |
| Length declared | 167.7 in · 4,260 mm | 175.2 in · 4,450 mm | — |
| Width declared | 92.3 in · 2,345 mm | 83.9 in · 2,130 mm | +10% 3108 |
| Ground clearance declared | 18.5 in · 470 mm | 18.0 in · 457 mm | — |
| Fuel tank declared | 254.7 qt · 241 L | 200.8 qt · 190.0 L | +27% 3108 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3108 sources
- Source: Traktorenlexikon, “Eicher 3108”
Landini 11800 (DT) sources
- Source: Traktorenlexikon, “Landini 11800 DT”
- Source: Traktorenlexikon, “Landini 10800 DT”