6 material differences · fewer than 12

Tractor oneEicher 30721985–1990No measured PTO figureTractor twoInternational Harvester 9331990No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (38%); the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

6 material differences · 3 fields identical or within 5%, which is not counted as material

Eicher 3072 and International Harvester 933, field by field
Field3072933Gap
Engine
Engine power, claimed claimed71 hp71 hp—
Engine declaredEicher EDL 4 - 4 TurboINTERNATIONAL-HARVESTER D-239differs
Displacement declared3.93 L3.91 L—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h18.6–24.9 mph · 30–40 km/h—
Hydraulics & hitch
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,631 lb · 3,915 kg6,239 lb · 2,830 kg+38% 3072
Wheelbase declared101.0 in · 2,565 mm84.6 in · 2,150 mm+19% 3072
Length declared151.2 in · 3,840 mm140.6 in · 3,570 mm+8% 3072
Width declared82.7 in · 2,100 mm64.6 in · 1,640 mm+28% 3072
Ground clearance declared—13.6 in · 345 mm—
Fuel tank declared—74.0 qt · 70 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Eicher 3072 sources

Source
  • Source: Traktorenlexikon, “Eicher 3072”

International Harvester 933 sources

Source
  • Source: Traktorenlexikon, “IHC 933”
  • Source: Traktorenlexikon, “IHC 574”