4 material differences · fewer than 12
Tractor oneEicher 30721985–1990No measured PTO figureTractor twoInternational Harvester 745 XL(A)1981–1990No measured PTO figure
Which should you choose?
Read our verdict on the 3072 and the 745 XL(A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 3072 | 745 XL(A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 70.7 hp | — |
| Engine declared | Eicher EDL 4 - 4 Turbo | IH D-239 | differs |
| Displacement declared | 3.93 L | 3.91 L | — |
| Maximum torque declared | — | 185 lb·ft · 251 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | — | Dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.2 gpm · 31.0 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,631 lb · 3,915 kg | 7,562 lb · 3,430 kg | +14% 3072 |
| Maximum permissible mass declared | — | 12,125 lb · 5,500 kg | — |
| Wheelbase declared | 101.0 in · 2,565 mm | 87.6 in · 2,226 mm | +15% 3072 |
| Length declared | 151.2 in · 3,840 mm | 146.9 in · 3,730 mm | — |
| Width declared | 82.7 in · 2,100 mm | 80.7 in · 2,050 mm | — |
| Ground clearance declared | — | 19.1 in · 484 mm | — |
| Turning radius, braked declared | — | 12.1 ft · 3.70 m | — |
| Fuel tank declared | — | 112.0 qt · 106 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3072 sources
- Source: Traktorenlexikon, “Eicher 3072”
International Harvester 745 XL(A) sources
- Source: Traktorenlexikon, “IHC 745XL”
- Source: Traktorenlexikon, “IHC 743”