6 material differences · fewer than 12
Tractor oneEicher 30721985–1990No measured PTO figureTractor twoFord 56101981–1991No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (43%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 3072 | 5610 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 71 hp | — |
| Engine declared | Eicher EDL 4 - 4 Turbo | — | — |
| Displacement declared | 3.93 L | — | — |
| Maximum torque declared | — | 181 lb·ft · 245 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-actuated, dry Borg & Beck single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.6 gpm · 36.4 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,631 lb · 3,915 kg | 6,047 lb · 2,743 kg | +43% 3072 |
| Wheelbase declared | 101.0 in · 2,565 mm | 87.5 in · 2,223 mm | +15% 3072 |
| Length declared | 151.2 in · 3,840 mm | 107.1 in · 2,720 mm | +41% 3072 |
| Width declared | 82.7 in · 2,100 mm | 76.4–96.5 in · 1,940–2,450 mm | differs |
| Ground clearance declared | — | 18.5 in · 470 mm | — |
| Turning radius, braked declared | — | 10.9 ft · 3.32 m | — |
| Fuel tank declared | — | 84.0–112.0 qt · 79.5–106.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher 3072 sources
- Source: Traktorenlexikon, “Eicher 3072”
Ford 5610 sources
- Source: Traktorenlexikon, “Ford 5610”