Eicher Mammut 3020 HR A vs Massey Ferguson MF 174 (A)

8 material differences · fewer than 12

Tractor one

1970–1972

No measured PTO figure

Tractor two

1973–1983

No measured PTO figure

Which should you choose?

Read our verdict on the Mammut 3020 HR A and the MF 174 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Eicher Mammut 3020 HR A and Massey Ferguson MF 174 (A), field by field
Field	Mammut 3020 HR A	MF 174 (A)	Gap
Engine
Engine power, claimed claimed	60.9 hp	60.2 hp	—
Engine declared	Eicher EDK 4	Perkins A 4.236	differs
Displacement declared	3.93 L	3.87 L	—
Maximum torque declared	183 lb·ft · 248 N·m	183 lb·ft · 248 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Foot-operated single-plate dry clutch in flywheel housing as PTO clutch	Pedal-operated dry LUK double clutch with 279 mm diameter	differs
Hydraulics & hitch
Pump flow declared	10.3 gpm · 39 L/min	—	—
Pressure declared	2,489 psi · 172 bar	2,589 psi · 178 bar	—
Three-point lift at ends declared	5,952 lb · 2,700 kg	3,362 lb · 1,525 kg	+77% Mammut 3020 HR A
Rear PTO speeds declared	590/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,757 lb · 3,065 kg	4,872 lb · 2,210 kg	+39% Mammut 3020 HR A
Maximum permissible mass declared	9,480 lb · 4,300 kg	—	—
Wheelbase declared	—	87.0 in · 2,210 mm	—
Length declared	141.7 in · 3,600 mm	142.5 in · 3,620 mm	—
Width declared	77.6 in · 1,970 mm	—	—
Height declared	66.9 in · 1,700 mm	55.9 in · 1,420 mm	+20% Mammut 3020 HR A
Ground clearance declared	11.0 in · 280 mm	—	—
Turning radius, braked declared	15.7 ft · 4.80 m	10.9 ft · 3.31 m	+45% Mammut 3020 HR A
Fuel tank declared	100.4 qt · 95 L	64.5 qt · 61.0 L	+56% Mammut 3020 HR A

Source

Source